Chapter 3: Management
0238 | 500000E01212F582 | CN2 |
0287 | 500000E0120B26B2 | CN2 |
0365 | 5000155FFFC0223E | CN2 |
0462 | 500000E0114F18F2 | CN2 |
0468 | 500000E01205B472 | CN2 |
0542 | 500000E01122C5B2 | CN2 |
0624 | 500000E0114E4A32 | CN2 |
0639 | 500000E0114D8E32 | CN2 |
0700 | 500000E0120B2A62 | CN2 |
0721 | 500000E0114DE7A2 | CN2 |
0751 | 500000E0114E5EA2 | CN2 |
0764 | 500000E0120B28F2 | CN2 |
0765 | 500000E0114C2342 | CN2 |
0977 | 500000E0120A2472 | CN2 |
1023 | 5000155FFFC02408 | CN2 |
The route command displays SAS addresses that are attached to the SAS ports of the J610s or J310s unit. Three items are reported:
•Entry# – Arbitrary numbers, listed in sequence
•SAS Address – Of the disk drive or other component
•CnID – External SAS port connector number 1 or 2
The device in this example is connected to a J610s unit through connector CN2. See page 21 for a diagram of connectors on the I/O module.
Route Troubleshooting
If your system returns:
No SAS Routing Entry Exists
...it indicates that no downstream devices are found.
Uptime Command
The uptime command informs you of the elapsed period of time since the J610s or J310s unit was powered on.
To display uptime:
cli>uptime
The system returns:
System has been running 1 day 9 hours 46 minutes 36 seconds
43
