Promise Technology J610S, J310S manual Route Command, Clearing the Error Count

VTrak J610s, J310s Product Manual

P20 ---------- ---------- ---------- ---------- ----------	0x8F
P21 ---------- ---------- ---------- ---------- ----------	0x8F
P22 ---------- ---------- ---------- ---------- ----------	0x8F
P23 ---------- ---------- ---------- ---------- ----------	0x8F

InDW:Invalid Dword Count DsEr:Disparity Err Count

DwLo:Dword Sync Loss Count

PhRe:Phy Reset Problem Count CoVi:Code Violations Cnt

PhCh:Phy Change Count

The following items are reported in the table above. All counts are hexadecimal:

•Link number – Links are PHYs, numbered P0 through P23.

The Link Status list matches Link number to Port number, where you can identify the specific disk drive or external SAS port reported in the Link Counter. See page 40.

•Invalid D-word Count

•Disparity Error Count

•PHY Reset Problem Count

•Code Violation Count

•PHY Change Count

If the count is zero, the counter shows dashes (----------). The fact that errors

occur does not necessarily indicate a problem or that the J610s or J310s unit is malfunctioning.

An individual error count that increments regularly indicates a possible problem and requires further investigation.

Clearing the Error Count

To clear the link error count:

cli>link -a clear

Route Command

To view the SAS addresses of the devices in your domain:

cli>route
The system returns:
Routing Table Mapping:
Entry#	SAS Address	CnID
---------------------------------------------------
0159	500000E0114D8FB2	CN2
0163	500000E0114C2252	CN2
0202	500000E0120B3562	CN2

42