VTrak J610s, J310s Product Manual
Setting Up Data Cable Connections
VTraks provide Direct Attached Storage (DAS) support to the Host PC.
Figure 13. VTrak J610s has one or two I/O modules
I/O module 1 (default primary)
I/O module 2
115200 | 115200 |
8 N 1 | 8 N 1 |
Figure 14.VTrak J310s has one or two I/O modules
O
I
115200
8 N 1
O
I
115200
8 N 1
I/O module 1 | I/O module 2 |
(default primary) |
|
There can be one or two Input Output Modules (I/O modules) on the VTrak.
•If your VTrak has two I/O modules, I/O module 1 (on the left) is the default primary.
•If your VTrak has only one I/O module, that I/O module is the default primary.
Under SAS specifications, both I/O modules are active at the same time. The terms primary and secondary are for enclosure management purposes only. To verify which I/O module is the default primary, see “Enclosure Command” on page 36.
20
