Help Command, Making Settings | Promise Technology J310S, J610S

Chapter 3: Management

•Automatic Shutdown – Shuts down the VTrak 30 seconds after the enclosure or controller reaches critical temperature.

•Minimum Fan Speed – Specifies the minimum fan speed when the VTrak reaches enclosure or controller warning temperature.

Making Settings

To set the enclosure critical temperature to 61°C (141°F):

cli>enclosure -a mod -s “enc_critical=61”

To enable Thermal Management:

cli>enclosure -a mod -s “thermalmanager=1”

For this command, a 1 enables and a 0 disables.

To enable Automatic Shutdown:

For this command, a 1 enables and a 0 disables.

To set the minimum fan speed to medium high:

For this command:

•1 means low

•2 means medium-low

•3 means medium-high

•4 means high

The actual speed depends on the fan manufacturer.

To display a complete list of Enclosure commands:

cli>enclosure -h

The VTrak CLI uses the standard Unix online help system.

To access general help:

cli>help