Q-Logic FC HBA CLI manual Target Persistent Binding Bind Targets, Selective LUNs Menu

A

4 – Interactive Commands Selective LUNs Menu (Command Line Option -m)

4.6.2.1

Display Target Persistent Binding

6: Target Persistent Binding p: All HBAs 1: Display Configuration

When you select the Display Configuration option, the following information appears. (Or, the message, No target persistent binding configuration on HBA instance n appears instead):

„Bind status (Yes)

„Device type (Disk, for example)

„Target information (model name and number, for example)

„Port Name

„Port ID

„Target ID

4.6.2.2

Target Persistent Binding – Bind Targets

6: Target Persistent Binding p: All HBAs 2: Bind Targets

See 4.6.1.2 Target Persistent Bindings – Bind Target(s) (Command Line Option -p).

4.6.2.3

Target Persistent Binding – Unbind Targets

6: Target Persistent Binding p: All HBAs 3: Unbind Targets

See 4.6.1.3 Target Persistent Binding – Unbind Targets (Command Line Option -p).

4.7

Selective LUNs Menu

(Command Line Option -m)

7: Selective LUNs

When you select this option, SANsurfer FC HBA CLI shows the Selective LUNs Menu (see 4.5.2), allowing you to select an individual HBA port or All HBAs.

4.7.1

Selective LUNs (Per HBA Port)

7:Selective LUNs 1: - m: HBA Port Instance

When you select this option, SANsurfer FC HBA CLI shows the following options for the HBA:

„Display LUN Configuration

„Manual Configure LUNs

SN0054614-00 F 4-49