Q-Logic FC HBA CLI manual Status Message, Reboot Message, Error Message

A – XML Format 1

XML Format 1 Tags for Each Option

S

A.1.3

Status Message

Before the closing main tag </QLogic>, SANsurfer FC HBA CLI displays returning status from the execution of the command line parameters and the error messages.

Successful execution of the command line parameters returns the following status:

<Status> 0 </Status>

When the execution of the command line parameters fails, the status value of non-zero is displayed, followed by an error message that provides additional details:

<Status> 1 </Status>

<ErrorMsg> Details of the failure </ErrorMsg>

A.1.4

Reboot Message

When the execution of the command line parameters is successful and the system must be restarted for the change to take effect, the following message is displayed:

<Reboot> 1 </Reboot>

When the execution of the command line parameters is successful and the system does not need to be restarted, the following message is displayed:

<Reboot> 0 </Reboot>

A.1.5

Error Message

Before the closing main tag </QLogic>, but following the Status message SANsurfer FC HBA CLI displays error information if the status is non-zero (indicating a failure).

<ErrorMsg> Details of the failure </ErrorMsg>

A.2

XML Format 1 Tags for Each Option

The following sections describe the XML format 1 for each command line option. In these sections, the term number refers to the adapter number displayed with the HBA general information (command line option -I).

A-2 SN0054614-00 F