Appendix A Error Messages and Codes
A.12 SYSTEM STATUS ERROR MESSAGES (16xx-xx)
Table
| Table |
| System Status Error Messages |
Message | Probable Cause |
Temperature violation | |
Fan failure |
A.13 HARD DRIVE ERROR MESSAGES (17xx-xx)
Table
Table A-12.
Hard Drive Error Messages
Message | Probable Cause | Message | Probable Cause |
Exceeded max. soft error limit | Failed I/O read test | ||
Exceeded max. Hard error limit | Failed file I/O compare test | ||
Previously exceeded max. soft error limit | Failed drive/head register test | ||
Previously exceeded max.hard error limit | Failed digital input register test | ||
Failed to reset controller | Cylinder 1 error | ||
Fatal error while reading | Failed controller RAM diagnostics | ||
Fatal error while writing | Failed | ||
Failed compare of R/W buffers | Failed to write sector buffer | ||
Failed to format a track | Failed to read sector buffer | ||
Failed diskette sector wrap during read | Failed uncorrectable ECC error | ||
Cntlr. failed to deallocate bad sectors | Failed correctable ECC error | ||
Cylinder 0 error | Failed soft error rate | ||
Drive not ready | Exceeded max. bad sectors per track | ||
Failed to recalibrate drive | Failed to initialize drive parameter | ||
Failed to format a bad track | Failed to write long | ||
Failed controller diagnostics | Failed to read long | ||
Failed to get drive parameters from ROM | Failed to read drive size | ||
Invalid drive parameters from ROM | Failed translate mode | ||
Failed to park heads | Failed | ||
Failed to move hard drive table to RAM | Bad track limit exceeded | ||
Failed to read media in file write test | Previously exceeded bad track limit | ||
Failed I/O write test |
NOTE: |
|
xx = 00, Hard drive ID test | xx = 19, Hard drive power mode test |
xx = 01, Hard drive format test | xx = 20, SMART drive detects imminent failure |
xx = 02, Hard drive read test | xx = 21, SCSI hard drive imminent failure |
xx = 03, Hard drive read/write compare test | xx = 24, Net work preparation test |
xx = 04, Hard drive random seek test | xx = 36, Drive monitoring test |
xx = 05, Hard drive controller test | xx = 71, Pri. IDE controller address conflict |
xx = 06, Hard drive ready test | xx = 72, Sec. IDE controller address conflict |
xx = 07, Hard drive recalibrate test | xx = 80, Disk 0 failure |
xx = 08, Hard drive format bad track test | xx = 81, Disk 1 failure |
xx = 09, Hard drive reset controller test | xx = 82, Pri. IDE controller failure |
xx = 10, Hard drive park head test | xx = 90, Disk 0 failure |
xx = 14, Hard drive file write test | xx = 91, Disk 1 failure |
xx = 15, Hard drive head select test | xx = 92, Se. controller failure |
xx = 16, Hard drive conditional format test | xx = 93, Sec. Controller or disk failure |
xx = 17, Hard drive ECC test | xx = 99, Invalid hard drive type |
|
Changed - April 2003