HP D315 manual System Error Messages, Table A-3

Technical Reference Guide

A.4 SYSTEM ERROR MESSAGES (1xx-xx)

Table A–3.System Error Messages

Table A-3.

System Error Messages

Message	Probable Cause	Message	Probable Cause
101	Option ROM error	110-01	Programmable timer load data test failed
102	System board failure (see note)	110-02	Programmable timer dynamic test failed
103	System board failure	110-03	Program timer 2 load data test failed
104-01	Master int. cntlr. test fialed	111-01	Refresh detect test failed
104-02	Slave int. cntlr. test failed	112-01	Speed test Slow mode out of range
104-03	Int. cntlr. SW RTC inoperative	112-02	Speed test Mixed mode out of range
105-01	Port 61 bit <6> not at zero	112-03	Speed test Fast mode out of range
105-02	Port 61 bit <5> not at zero	112-04	Speed test unable to enter Slow mode
105-03	Port 61 bit <3> not at zero	112-05	Speed test unable to enter Mixed mode
105-04	Port 61 bit <1> not at zero	112-06	Speed test unable to enter Fast mode
105-05	Port 61 bit <0> not at zero	112-07	Speed test system error
105-06	Port 61 bit <5> not at one	112-08	Unable to enter Auto mode in speed test
105-07	Port 61 bit <3> not at one	112-09	Unable to enter High mode in speed test
105-08	Port 61 bit <1> not at one	112-10	Speed test High mode out of range
105-09	Port 61 bit <0> not at one	112-11	Speed test Auto mode out of range
105-10	Port 61 I/O test failed	112-12	Speed test variable speed mode inop.
105-11	Port 61 bit <7> not at zero	113-01	Protected mode test failed
105-12	Port 61 bit <2> not at zero	114-01	Speaker test failed
105-13	No int. generated by failsafe timer	116-xx	Way 0 read/write test failed
105-14	NMI not triggered by failsafe timer	162-xx	Sys. options failed (mismatch in drive type)
106-01	Keyboard controller test failed	163-xx	Time and date not set
107-01	CMOS RAM test failed	164-xx	Memory size
108-02	CMOS interrupt test failed	199-00	Installed devices test failed
108-03	CMOS not properly initialized (int.test)
109-01	CMOS clock load data test failed
109-02	CMOS clock rollover test failed
109-03	CMOS not properly initialized (clk test)

NOTE: A 102 message code may be caused by one of a variety of processor-related problems that may be solved by replacing the processor, although system board replacement may be needed.

hp/Compaq Personal Computers A-3

Changed – April 2003