Chapter 4 System Support
4.7.2 POWER MANAGEMENT
This system provides baseline hardware support of ACPI- and
ACPI | System Wakes From |
Power Button | Suspend or |
RTC Alarm | Suspend or |
Wake On LAN (w/NIC) | Suspend or |
PME | Suspend or |
USB | Suspend only |
Keyboard | Suspend only |
Mouse | Suspend only |
4.7.3 SYSTEM STATUS
These systems provide a visual indication of system boot and ROM flash status through the keyboard LEDs and operational status using
NOTE: The LED indications listed in Table
Table
Table
System Boot/ROM Flash Status LED Indications
|
| NUM Lock | CAPs Lock | Scroll Lock | |
| Event | LED | LED | LED | |
| System memory failure [1] | Blinking | Off | Off |
|
| Graphics controller failure [2] | Off | Blinking | Off |
|
| System failure prior to graphics cntlr. initialization [3] | Off | Off | Blinking |
|
| ROMPAQ diskette not present, faulty, or drive prob. | On | Off | Off |
|
| Password prompt | Off | On | Off |
|
| Invalid ROM detected - flash failed | Blinking [4] | Blinking [4] | Blinking [4] |
|
| Keyboard locked in network mode | Blinking [5] | Blinking [5] | Blinking [5] |
|
| Successful boot block ROM flash | On [6] | On [6] | On [6] |
|
NOTES:
[1]Accompanied by 1 short, 2 long audio beeps
[2]Accompanied by 1 long, 2 short audio beeps
[3]Accompanied by 2 long, 1 short audio beeps
[4]All LEDs will blink in sync twice, accompanied by 1 long and three short audio beeps
[5]LEDs will blink in sequence (NUM Lock, then CAPs Lock, then Scroll Lock)
[6]Accompanied by rising audio tone.
Second Edition – April 2003