Hitachi GR2000 Series manual Common, Configuration Error Messages, Message Contents

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

5.1Common

Table 5-1 Configuration Error Messages

Message	Contents
Can not execute config command, please try	Communication error occurred between processes.Wait for recovery,
again.	then execute again.
Command incomplete because processing	Because processing deletion of configuration is taking too much
configuration deletion exceeded time limit.To	time, command is interrupted.Execute same command again.
complete deletion, please try same command	For example, if this message is displayed during the deletion of line
again.	information, the IP information and line information may not have
	been deleted even if the IP routing protocol has been removed.
Configuration file is closed.	Current or spare configuration file closed.After opening current or
	spare configuration file, execute configuration command again.
illegal option -- <Option>	Illegal option entered. Correct the option.
Interface name not found.	Specified interface name not found. Specify a correct interface
	name.
Invalid subcommand.	Subcommand invalid. Enter a correct subcommand.
<item> is not in range <value1> to <value2>.	The value is out of range. Set the in-range value.
	<item>Parameter name, <value1> Minimum value,
	<value2>Maximum value
Logical inconsistency occurred.	An internal program complication has occurred in editing and
	processing the configuration defining information. Collect the
	following log information and deliver it to the maintenance person.
	The maintenance person will send the log information to the assisting
	department.
	[Procedure to collect log information]
	1. Set the terminal so that the screen logs can be collected.
	2. Execute the following commands.
	(1) cat/var/tmp/gen/genTrace_config
	(2) cat/var/tmp/gen/genTrace_configManager
	(3) /usr/local/diag/configShowBinary
	3. Finish collecting the screen logs.
Maximum number of entries are already	Attempt made to add entries exceeding the limit. Delete unnecessary
defined.	entries, then add an entry.
No enough parameters.	The parameters are insufficient. Specify the necessary parameters.
No such delete index	Because the entered value is illegal, configuration information cannot
	be deleted. Enter a correct value.
No such insert index	Because the entered value is illegal, configuration information cannot
	be inserted. Enter a correct value.
No such <object>	The configuration defining information for the name designated in the
	<object> is not available. Designate the name of the defining
	information being set.
Now another user configured, please try	Another user is currently changing the configuration. Wait for access,
again.	then execute again.
Now configuration data is changing, please try	Configuration information being changed. Wait for the change, then
again.	execute again.
Now configuration file is locked, please try	The operating configuration defining information cannot be edited
again.	because another user is referencing it using the command.
	If "more" is displayed in the operation command that indicates the
	interface name, finish the "more" display, and execute the command
	again. If “more” is not displayed, execute it again after a while.
Operation not permitted	Because operation configuration information written in memory is
	being edited, operation is not permitted.
option requires an argument -- <Option>	Option entry insufficient. Correct the option.
5-2	GR2K-GA-0014
	Ver. 07-02