Hitachi GR2000 Series manual He OSPFv3 domain number is duplicate-defined. Do not

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Table 5-5 Routing Protocol Error Messages (continued)

ospf: stop generate time must be later than	MD5 authentication message digest generation end time is earlier
start generate time	than start time. Set the value so start time is earlier than end time.
ospf: stub option not valid for backbone	Stub parameter is specified in the OSPF backbone definition.
	Do not specify a stub parameter in a backbone area.
ospf: syntax error	Syntax error
ospf: this Router ID and Neighbor ID must be	This Router ID and Neighbor ID are the same.
different	Specify the different IDs to this Router and Neighbor.
ospf: transit-area can not be the	The transit area of virtual link is defined outside the backbone area.
’backbone’area	Set virtual link other than backbone area.
ospf: unknown authentication type: <Value>	In the OSPF definition, authentication type is illegal. For
	authentication type, specify “simple” or “md5.”
	<Value>: Specified authentication type
ospf: virtual links only allowed in	The virtual link is defined outside the backbone area. Set virtual link
’backbone’area	within backbone area.
ospf: year must be after 1970	The year is before 1970. Specify a year after 1970.
ospf6: 2 or more areas have been defined:	Two or more OSPFv3 areas are defined, but a backbone area is not
need to configure backbone	defined. Define a backbone area.
ospf6: domain <Domain Number> duplicated	he OSPFv3 domain number is duplicate-defined. Do not
	duplicate-define the OSPFv3 domain number.
ospf6: duplicate area	The area ID of OSPFv3 is duplicated for definition. Specify area ID
	so that it is not duplicated.
ospf6: duplicate entry at <Prefix>/<Prefixlen>	The network range is defined in duplication in the OSPVv3 definition.
	Specify the range so that the network range will not be duplicated.
	<Prefix>: Specified prefix
	<Prefixlen> Specified prefix length
ospf6: duplicate ospf interface parameter --	In the area definition of OSPFv3, the interface cost of an interface
“cost”	parameter is double-defined. Do not double-define an interface cost.
ospf6: duplicate ospf6 clause	OSPFv3 is double-defined. Delete one of the definitions.
ospf6: duplicate virtual link	The pair of the passage area and the adjacent router ID has already
	been defined in the hypothetical link definition of the OSPFv3.
	Specify the pair so that the pair of the passage area and the adjacent
	router ID will not be duplicated.
ospf6: error in common options --possible	In the area definition of OSPFv3, the interface cost of an interface
duplicate or conflicting option?	parameter is double-defined. Do not double-define an interface
	option.
ospf6: Interface not found at ’ <Interface	The interface of the specified interface name cannot be found.
Name>’	Specify it by using the defined interface name.
	<Interface Name>: Specified interface name
ospf6: invalid area-number value at ’<Value>’	OSPFv3 area ID is invalid. Specify within the range of 0.0.0.1 to
not in range 1 to 4294967295	255.255.255.255.
	<Value>: Specified area ID
ospf6: Invalid domain configuration value at ’5’	The number of OSPFv3 domain configuration definitions exceeds
not in range 0 to 4	four upper-limit values. Delete any of the OSPFv3 domain
	configuration definitions.
ospf6: invalid domain-number value at	The OSPFv3 domain number is invalid. Specify within the range of 1
<Domain Number> not in range 1 to 65535	to 65535.
	<Domain Number>: Specified domain number
ospf6: invalid export-type value at ’<Value>’	The AS external type is invalid. Specify within the range of 1 to 2.
not in range 1 to 2
	<Value>: Specified AS external route type
ospf6: invalid external-route-tag value at	The AS external tag value is invalid. Specify within the range of 1 to
<Value> not in range 0 to 2147483647	2147483647.
	<Value>: Specified AS external tag value

5-42	GR2K-GA-0014
	Ver. 07-02