Manuals / Hitachi / Computer Equipment / Network Router

Hitachi GR2000 Series manual State of IP Output Priority 1 2 Packet Type Flow Queuing

Models: GR2000 Series

1 500

Download 500 pages 15.25 Kb

Page 56

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

	Table 1-10	Priority for Each Packet Type When classify_all_off is Specified
		(For all Models Except GR2000-1B, GR2000-2B, GR2000-2B+ and Group
		Band Control)

			State of IP				Output Priority (1) (2)
	Packet Type		Flow									Queuing
			Flow		4	8	16	32	64	250	1000	Queuing
			Detection									Priority
			Detection									Priority
			Conditions		Queue	Queue	Queue	Queue	Queue	Queue	Queue

ARP (ARP Request/ARP			--		4	8	16	32	64	250	1000	4
Response) packet
generated by this router

Layer 2 packet generated			--		4	8	16	32	64	250	1000	4
by this router (WAN)

IPv4 packets generated by			Coincides/		4	8	16	32	64	250	1000	4
this router (RIP, OSPF,			Does not
BGP, telnet, ftp, snmp,			coincide
igmp, pim, etc.)

IPv4 ICMP packet for			Coincides/		2	4	7	13	25	98	392	1
reporting the error			Does not
generated by this router			coincide
					2	4	7	13	25	98	392	4
IPv4 packets relayed by			Coincides/		2	4	7	13	25	98	392	4
this router			Does not
1.	Packet with option (IP		coincide
	header)
2.	Fragmented packet
3.	Redirected packet
4.	ARP unsolved packet
5.	DVMRP-capsulated
	packet sent to the
	DVMRP tunnel
	interface

IPv4 packets except in			Coincides			Priority specified by flow qos configuration definition
item Nos. 3 to 5
item Nos. 3 to 5			Does not		2	4	7	13	25	98	392	4
			Does not		2	4	7	13	25	98	392	4
			coincide

IPv6 packet generated by			Coincides			Priority specified by flow qos configuration definition
this router (Except in item
this router (Except in item			Does not		4	8	16	32	64	250	1000	4
No. 9)			Does not		4	8	16	32	64	250	1000	4
No. 9)			coincide
			coincide

IPv6, ICMP to notice a			Coincides.			Priority specified by flow qos configuration definition
error generated by this
error generated by this			Does not		2	4	7	13	25	98	392	1
router			Does not		2	4	7	13	25	98	392	1
router			coincide
			coincide

IPv6 packet relayed by this			Coincides.			Priority specified by flow qos configuration definition
router
router			Does not		2	4	7	13	25	98	392	4
			Does not		2	4	7	13	25	98	392	4
			coincide
--: Does not agree with the IP flow detecting condition because it is not the IP packet.
*1: This function can specify the priority of all IP packets by flow configuration definition.
*2: The output priority indicates the queue number for stacking packets.

1-14	GR2K-GA-0014
	Ver. 07-02

Image 56

Hitachi GR2000 Series State of IP Output Priority *1 *2 Packet Type Flow Queuing, Detection Priority Conditions Queue

Contents

Hitachi Gigabit Router GR2000 Series Enhanced Version GR2K-GA-0014 VerVer Release 06-05 December Change RecordPreface GR2K-GA-0014GR2000 Gigabit Router Series Documentation Title Description/Notes Part NumberAbbreviations GR2K-GA-0014 VerBoot Strap Router Common Open Policy ServiceCoS Class of Service Carrier Sense Multiple Access with Collision DetectionGuaranteed Frame Rate Integrated Services Digital NetworkInternet Service Provider Frame Check SequenceViii GR2K-GA-0014 Ver Network Service Access Point Operation Administration and ManagementProtocol Independent Multicast-Dense Mode Protocol Independent Multicast-Sparse ModeProduct Support Service QoS Quality of Service Router AdvertisementService Access Point Service Advertising ProtocolSwitch to Switch Protocol Switched Virtual Channel ConnectionType Of Service Weighted Fair QueueingAcknowledgments XiiBsdi Internet Server XiiiAT&T David M. GAY XivINFO-ZIP Group SUN MICROSYSTEMS, INC XviWildboar Copyright 1995 Frank van der Linden. All rights reserved XviiiTheo DE Raadt Diff, grep Tcpd Los Alamos National Laboratory XxiiApache Http server Xntp Program XxivMrouted PIM sparse-mode pimd XxviXxvii Ver General Safety Guidelines Damage to the equipment or a disruption in serviceSpecific Warning Instructions XxxTo avoid damage to the equipment or a disruption in service Specific Caution InstructionsCleaning Other InstructionsStorage For users in the UK and DenmarkTable of Contents Bridge Objects Snmp ObjectsHost Name Information Log Information100 101102 GR2K-GA-0014 Iii VerIndex 132 133134 177This page left intentionally blank GR2K-GA-0014 Vii Ver 111 112117 118165 166169 170Default Values During Initial Installation NAT-PT Error MessagesDNS Resolver Information Error Messages Log Information Error MessagesChapter Range of QoS, Filter-Flow Control Flow Information1 IPv4 Flow Control Packet in accordance with the flow Filter function on the first input side stageFirst input side stage executes the following functions Defines using and unusing of each control Filtering/QoS Information Constituting Definition Iinput FormQos-ip-list, qos-ip-list-group, qos-ip Flow filter 2 IPv6 Flow ControlConstituting Definition Input Form Features of a flow filter input format are listed in Table Features of a flow qos input format are listed in TableConfiguration Input Format Interface Types that Support Flow ControlInput Output Side Interface NameIPv4 IPv6 Setting the information Flow Flow InformationInput Form Types of action Flow control EffectBe changed when copsyes is set in the cops configuration Which a Cops agent function can be set to all RPs. It cannot√ Setting possible Setting not possible Supported L2 UPC functions for each RP typePriority Conditions QueueConditions WANState of IP Output Priority *1 *2 Packet Type Flow Queuing Detection Priority Conditions QueueARP ARP Request/ARP Response packet By this router Layer 2 packet generated by IP header Definition Does not Coincide GR2K-GA-0014 Ver ROUTE-OS7 Priority Discard threshold User priority Send queue number Out Action Fu ction can be setSett ng L2 UPC functions Rela ed Commands Pre autionsFlow filter Filter Flow Information RP-C, RP-C620 Maximum Definable Entries by Each PM Mounting Memory Size When all high order protocol is target Flow filter IPv4Flow detecting condition and the operation Changing only the operation designationDeletion of the information RangeGR2000-2B RP-C6, RP-D6GR2000-1B Filtering/QoS Information 22 General Protocol Number Protocol NoUpper Upper limit of the IP user data length is designated Lower Lower limit of the IP user data length is designatedSets the Vlan ID of tag-VLAN List information that sets this parameter should be setInbound and specified as the flow detection conditions on Input side25 General Icmp Type and Code Nnumber 26 General Icmp Type NumberType Name Code Type NameDefault -forward None Operation ParameterInterface name set in the information. Refer toTable 27 List of Interfaces Supporting Flow ControlDefault -forward Range of value 0 to GR2K-GA Packet Type Limited Filtering ItemForward Insertion IstsNdition and the operation Chan of pa ametersIgnati n Filter List Anyaciondrop Tokyo Ti n par meter Let on of operati n d s gnIndication Indication in input/output interfDisplay of blank Numb1 IndicateRelated Commands Related Informati nFlow filter IPv6 ROUTE-OS6 Input FormatIndication of the information Indication of a blank list number in the specified rangeIndication of top blank list number in the specified range Parameter GR2000-2B Main Item Sub-Item Input Output SideThis command. The RM Ethernet is not supported. For details Default No default is possibleSubject interface name set in the IP information or IP-address information is designated. The IP information or30 General Protocol Number If all IPv6 addresses are designated anyUpperUpper limit of the IP user data length is designated LowerLower limit of the IP user data length is designatedResult General Port NumberNone No default is possible when designating the operation 33 General ICMPv6 Type and Code NumberOperation Parameters Parameter at the head of the whole operation parameter34 List of Interfaces that Support Flow Control Interface Name Availability of SupportFlow RwardVer Tokyo Config# Ction Yes Pa ameter n forCnfig#showflowfilter Deletion n list un t3ffe501811ff0111 Display of blank Display of top blank list number in allRelated Information Filtering/QoS Information Related CommandsFlow qos QoS Flow Information SetflowqosInterfaceNameinout-disable Flow qos IPv4Value Indication of blank list number the specified range ParametersminnoParameter Main Item Sub-Item Input Output Side Only GR2000-1B, GR2000-2B and GR2000-2B+ can be set Filtering/QoS Information Flow Control Operation Parameter Parameter 38 General protocol number IP User Data Default None Range of value 0 to 40 General Icmp Type Code NumberDescription Specifies the Igmp type Port Dumber Name DecimalGeneral Icmp type number Range of value To 255 ten-decimals. Please refer to Table41 Genral Igmp Type Code Number Page Filtering/QoS Information 43 Relationship Between Number of Queues and Priority Packet Specifies the queuing priority after having been changed. IfRelationship Between Number of Queues and Priority 45 Number of Entries Used per List by Each Setting Setting Contents Setting Parameter Number EntryFlow Tokyo and the transmitter addressesWflw QosTokyo1out Inserting tList QosTok UnitDelete Put/output interface unitOut Erface Tok oFlow qos IPv6 ROUTE-OS6 Filtering/QoS Information Related InformationMinno Indication of blank list number in thespecified rangeFiltering/QoS Information Parameter Parameter GR2000-1B/2B Main Item Sub-Item Input Output SideUser priority rewrite Replaceuserpriority 47 Operating Parameters that Can Be Set for Each Operation Operation Parameter Flow ControlCommand. RM Ethernet and Tunnel interface are not Out Outbound specification of the frame output sideOr ip-address information. The ip information or Ip-address information should be set before inputting thisFlow Detecting Condition Parameters 48 General Protocol NumberTo be designated is Default No default is possible Range of value IPv6 addressAll IPv6 addresses are designated any Upper limit of the IP user data length is designated Specifies the transmitter port numberIf port to be specified is one nnnnn Range of value To 65535 decimal. Please refer to Table50 General Icmp Type Code Number Specifies the IGMPv6 type51 General IGMPv6 Type Code Number Port Number Decimal NameDefault None Range of value 0 Filtering/QoS Information 51 General IGMPv6 Type Code NumberDefault None Range of value 0 to Range Penaltydrop-penaltydiscarddNo.-penaltydscpDSCPValueVer.07-02 53 Relationship between number of queues and priority 54 Number of Entries Used per List by Each Setting ExamplesNlist4001ip Specifies that packeConfig# Conf ig# Cnfg#showflowqosTokyoout Conf ListList 103List401ip Displaying Unit 10540002-60000 Display of top blank list numberConstituting Definition Inputting Form Filtering/QoS Information PrecautionsGR2K-GA-0014 107 Ver Filter FunctionOrt Ressed to this outerTo create or modify the filter list information To show the informationSubcommand To show the first free entry No56 Applicable Parameters by Upper Protocol GR2K-GA-0014 111 VerCorresponding Values tos Value Specifies the value of high-order 6 bits in the TOS fieldPacket. The low-order 2 bits are ignored Default On Setting byFiltering/QoS Information Corresponding Values Diff-serv GR2K-GA-0014 113 Ver-portpairoption checks for not switching and for -portpairoffoption only checks for not switchingProtocol port number. The -portpairoption requires setting Synchronized pair switch for the IP address upperWhen specifying port numbers within a range Only checks for not switching sourceNumber. However, when -ippair or -portpair is specified Checks for not switching source IPGR2K-GA-0014 60 Combination of Pair Switch 61 Combined Setting of Pair Switch and Possibility of UseCombination of Pair Switch Setting Processing GR2K-GA-0014 117 VerDefault Undefined Range of value Default -ack off Range of valueDefault -syn off Range of value None Specifies the Icmp code number in decimal 63 Igmp Type NumberGR2K-GA-0014 119 Ver Igmp Type No. h Input Value Decimal Name64 ReplaceTOS Field Rewriting ExampleAir Ilt Delete parameters of filter list informationShow filter list number 2 information 123Setfilter- groupFilter-Group-NameFilterListNo Before entering this command Default Undefined mandatory input Range of value 1024To delete the filter group information Insert filter GroupFilterGroupip1 Ins t the con iguration informationConfiguration Objects Delete filter list number 9 of filter group name ip1Under which packets are relayed Group being used in the filter interface cannot be deleted128 GR2K-GA-0014 To create the filter interface information FilterinterfaceSpecifies the target interface name predefined by the ip or Filter interface Group 129Related Co Pre autionQuality of Service QoS Objects Transmission controlQos-ip-list, qos-ip-list-group Flow filter Qos-ip-list Qos-ip-list-group GR2K-GA-0014 133 VerSetting information No disable1 qos Non-IP protocol QoS controlYes enable Setting QoS parameters To enable flow controlThis parameter uses all interfaces by a Cops function GR2K-GA-0014 135 VerQoS inf rmation have been specified Office1Des Qos yes Qos no GR2K-GA-0014 137 VerSetting/modifying information Qos-queue-list67 shows parameters to be set per queue mode 67 Parameters To Be Set Per Queue ModeRound-robin scheduling Minimum bandwidth guarantee Output priority control68 Maximum Range of Send Bandwidth GR2K-GA-0014 141 Ver Queue Control Send Control MediaLayer ProtocolQueue mode It is invalid in -priority or roundrobin mode. BandwidthAllocation is determined by the line rate set this as a Less and indicate at least one queue withinNumber equally. Sets only when queue mode is Equalbandwidth. Invalid when queue mode is -priorityRoundrobin, -bandwidth, -bandwidthkbps or BandwidthtrafficMaxqueue Maximum queue count is Maximum queue count is 64*1 ROUTE-OS6BGR2K-GA-0014 145 Ver Support Parameter 10BASE-T 100BASE-TX 1000BASE-LX 1000BASE-LHGR2K-GA-0014 147 Ver 10BASE-T 1000BASE-LX 1000BASE-LHSetting parameters To set the queueA mode for priority To queue1 and 80 percent toBandwidth To set minimumUe-st 149List Ettings To display all sett ngsTo delete Set can be Leted by sp cifying pa amet r nameQueueA Min152 Queue Qos-interface75 Parameters That Can be Set by Each Transmission Control DefaultNone only the displayed value is supported Filtering/QoS Information Parameters76 Interface Names GR2K-GA-0014 155 VerNEB1G-1B can be set at up to 590 Mbit/s List When t Filtering/QoS Information ExamplesCenter Traffic Lineinterface Line center etheGR2K-GA-0014 159 Ver 160 To display all ettings Ver 161 GR2K-GA-0014162 Dele Grup GR2K-GA-0014 165 Ver Discard Mode Default3 Range of valueDiscard Priority Class Mode Qos-discard-modeSetting parameters To set discard mode 2 on NIF number To delete t e NIF Mode TtingDeleting Mod fying paramete s To changeFree Displaying the first free entry No GR2K-GA-0014 169 VerFlow-Detection Parameter Upper-Level Protocol Unspecified OtherCondition Flow Control Parameter This parameter specifies the QoS IP frame condition listFlow Detection Condition Parameters Limits LimitThis parameter specifies values corresponding to High-order bits in a TOS field or a DS field of Diff-serv,They overlap, set an IP address pair switch as ip-pair-off Address is specified as -ipsource IP Address. An addressBoth source and destination IP addresses are set under one Single address is specifiedGR2K-GA-0014 173 Ver Default None Icmp type is not a flow detection condition This parameter specifies the Icmp type85 List of Igmp Type Number Igmp Type No. HEX Input Value Decimal NameThis parameter specifies an EXP field value. The number Flow Control ParametersFlow control parameter GR2K-GA-0014 175 VerDefault Operation Change Method GR2000-1B and GR2000-2BGR2K-GA-0014 177 Ver 87 UPC Combined Setting SequenceCombined Setting Setting Sequence Protection Maxpriorityclass 8 The maximum output priority isMaxpriorityclass 16 The maximum output priority is Maxpriorityclass 32 The maximum output priority isDefault Range of value Greater Discard priority88 Range of Priority Class and Discard Class GR2K-GA-0014 179 Ver180 GR2K-GA-0014 Ver Range of Priority Class and Discard Class 90 Combination of Pair Switch 91 Combined Setting of Pair Switch and Possibility of Use Delay Throughput Reliability TOS NumberFormula to calculate the TOS number is TOS Number CalculationQueue No Class No Queue Count Matched Unmatched Setting Value ReplacingMapping of Class No. and Queue No. Max Output Priority is GR2K-GA-0014 185 Ver Sets only when output line protocol is frame relay 96 Mapping of Class No. and Queue No. Max Output Priority isSource IP address Replacetos 240 -upc 1000000 -upcpenalty dropMaximum limitat Tec ion Flow detectionIon parameter of important packet RedGroup189 ConfigFlow detection Ndi ion parameter of prio ity packet No1 Modify parameters RlaceTo display optional QoS IP frame condition list Delete sePacket type Output Priority Queuing 97 Packet TypeGR2K-GA-0014 193 Ver Deleting settings 194Display ng Insert ng eQos-tos-map Dele eSettings Default See table belowDefault See table below Range of value GR2K-GA-0014 197 Ver198 Mapping of TOS Value and Output/Queuing Priority Class Hatching part is RFC’s recommended valueGR2K-GA-0014 199 Ver Output QueuingModifying param ters To change the-ueuing Precedence TosDeleting ttings 200For the flow control, refer to the GR2000 Applications Guide 201Display settings Default Cannot be omittedInbound setting frame input side Outbound setting frame output sideConfig# To delete inboundPre AutiVer.07-02 Line=0GR2K-GA-0014 205 Ver Default4 Range of valueQos-ipx Lay the name f the optional interface Deleting settings Mod fying ArametersTo hange the qu u ng prior Office1 Display ng sett ng To d s Lay AllPrecaution 207Mod fying parameters Displaying settings a. To display all If this commandTo delete t Discard 2class Nterface Name4 Office1 GR2K-GA-0014 209 VerNumber Default Parameter sets the output priority class. In the caseOutput priority control, used as the output priority class. Case of bandwidth and round-robin, used as queueDeleting param ter Deleting etting To delete t SettingsDisplaying Etting To disp ay Shaper shaper transmission information Case of output priority controlIf the queuing mode is not omitted SetParameters for each queuing mode SupportedParameter 1000BASE-SX Description 1000BASE-LX 1000BASE-LH 101 Default length of each queueQueue number Default queue length Displaying Setting information Fair queuing 4WFQ Tting VLAN3 in we ghDisplaying random Vlan line name settings Del Ing set ing informationPre Ution Ntee ethe specified bandwidth if the flow controlCops Cops102 Allowable Characters GR2K-GA-0014 219 VerDefault3101 Range of value 0 to 65535 decimal Default 3101This parameter sets the server password encryption key Set copspassword when setting this parameterGR2K-GA-0014 221 Ver Default BytesDefault3 Range of value 0 to Display ng setting information Chan ingRelated Commandsrimary Deleting parameters Definition of Cops is deleted224 IPX Objects 1 ipxThis sets the operation information for IPX routing This parameter determines whether the IPX routing thisDefault20 Range of value Splay the content of the definitioChan e paramet rs Ange the IPX routing operati to D sableSetting information Changing information Ipx-interfaceIPX/Bridge Information This parameter specifies the interface name to be set. PayWhen the specified interface is ATM, WAN frame relay, or Default None cannot be omittedThis parameter is the forwarding switch when the diagnostic Do not forward Forward diagnostic packet DefaultDoes not deliver this packet periodically Send SAP packet DefaultSend RIP packet Range of value 1-0xfffffffe in IPX Address Reply NetworkInterface Network Sett ngDel Terface PriodicTo play Pt on Delete settings Default Cannot be omitted Range of valueIs used Description This specifies the node address MAC addressVpvc1 This command allows setting of the IPX static route Static-routeRegistered static routing entry Forwarding destination of the IPX packet attached toTo the destination network based on the number of ticks Among the routes to the destination network, the one withSmallest number of ticks has priority Erting parametersIs xecuted, and the changed IP routing protocol Deleting set ingsRelated Comma ds Number. The reference values are shown in -1 below This command sets the static SAP informationStatic-sap Server Type Reference Values Type Server TypeExamples000000000001-fffffffffffe AticAddress ntwok444444443333333333 To display HopReflected to the ope ation Pre aut onsOuting p otocol information, and Mpls information are Inserting settings Parametersshowrip- NoDisplaying settings To display al To d s Lay opt ons for RIP filtering en ry numberInfo mation entry number AmeterAp ly command is not being executed, the apply subcommand is Prot col informaFiltered using a 4-digit hexadecimal number Default Specifies all interfaces DefaultNetwork address xffffffff specifies all interfaces Default Filtering to be applied to receiving packets DefaultTo insert new information Displaying Tings To dis Lay alProt col info Information, IP multic st rouReflected to the p Ion Is donebefore the IPX packet is transmittedChanging settings Using 2-digit hexadecimal numberRange of value 0-0xff Range of value 0-0xffffffffSockefiltering2forwardprotocol Ing parame To chFilt ildr Inserting par MetersReflectedconfig#to thedeleteipxoperat on-. filter1-network If this command Is input d Bridge ObjectsBridge Object for display of the Bridge informationDefining You can define the bridge interface configurationBridge-interface Default-enable Or more interfaces on the same bridge are connected toSame network Frame format described here is only for MACConf Uration display To display all To display spec fic information Conf Ion deletionHe bridge-interface of interface sk2 Delet ng param te sFiltering-database IPX/Bridge Information Related CommandsDefault300 Range of value 10-1000000 Interface address. It also deletes the frame when receiving Sets the static entry MAC address to register withFiltering-database in canonical representation This sets filtering drop deletes all frame destinationsExtended-filtering DeleteConfigure as filter1, then as filter2 and filter3 Type field when the format is EthernetNo information Recipient MAC address 6 octetThis parameter configures bit patterns hexadecimal that Configures bit patterns hexadecimal that check filteringDefault Range of value 0-0xffffffffffff Filtering. This is valid only when chosen type is userDisplaying setting information a. Display all information Executed before He commandDisplay Speci c information Del ting s ing Nform tion To deleteDefault32768 Range of value Default Seconds Range of valueSpanning-tree Displaying informationTo del te t pr ority IPX/Bridge Information Precausion This page left intentionally blank Snmp Objects SnmpApplication of Snmp Information Objects To create or modify an Snmp ManagerDefault Read Range of value Read or read-write Manager. When none is specified, no trap is performed. WhenIs specified, the standard trap is enabled. When extrap is Enabled. The individually specified trap is issued whenDefault Protocol Range of value Interface or Is specified Parameter Moment at Which coldstart trap is IssuedParameter Moment at Which link up/down trap is Issued Snmp Information Trap System Message LevelsParameter Moment Which link up/down trap is Issued Default Standard Range of value Or standard is specifiedMode is selectiontrap Mthe Traprtransmission mode is selectiontrap Snmp InformationGR2K-GA-0014 Display register status of Snmp Manager Related ConfigurSpec fied trap are issued when selectiontrap is Default50 Range of value History-controlTo create an Rmon Ethernet history-group control entry Specifies the Rmon Ethernet history-group control indexDefault 1800 Range of value 3600 Ethernet history events. This parameter corresponds toRFC1757 For allowable charactersWner Related Configu a ion Object BucketsAlarm To create an Rmon Ethernet alarm-group entrySpecifies the Rmon Ethernet alarm-group index number. This Threshold. This parameter corresponds to alarmVariableThreshold. This parameter corresponds to alarmInterval Corresponds to alarmSampleType of RFC1757Default Range of value Falling AlarmRisingThreshold of RFC1757Is not issued. This parameter corresponds to AlarmFallingEventIndex of RFC1757This setting. This parameter corresponds to alarmOwner Short of the falling threshold. Such index number must beSnmp Information Show the resulting alarm-group entries Alam AlathresholdNet history group can be referenced using an Snmp Make sure that Settings areVabl Related Conf gu ion ObjecEvent To create an Rmon Ethernet event-group entrySpecifies the Rmon Ethernet event-group index number. This Event. The trap option causes transmission of Snmp trap toExample Howeve Related Configu a ion Objects Show the registration status of Rmon event-group entryEvent-group entries LatterTo create a host name entry Host Name InformationHosts Create a host name entry and show the result IPv6 Displa ing the configura ion informationCreate a host name entry and show the result IPv4 Operation Management Information Precautions Dns-resolverTo delete domain name Validity of DNS resolverOperation Management Information Dele On of setDele DNS resolver information Effectuation He DNS relay Effectuates the DNS functionGR2K-GA-0014 Network by the following methods Log InformationLogger-syslog Setting of log syslog information Syslog informa Del tion Setting f Ou puttingA notice level Displaying Logger Co fiLogger-email Re ated Commands Mail nformation Te the etting to send Event levelTting information Show ng Rmati nLogger-email-fromLog E-Mail Transmission Source Information To set informationLogger-smtp Log E-Mail t ansmission source inf rmation is displayedGinning To set information To delete informationRe ated Command Operation Management Information ParameterGR2K-GA-0014 Setting information Setting enable/disable Report e-mail report informationSets whether or not to use the -mail report function Specifies the local e-mail addressSending -mail reports Specifies the Smtp server port number for sending e-mailReports Standard valueOperation Management Information Example Definitions Related Configura ion ObjectThat enables -mail transmissions via the Internet Operation Management Information This set of parameters specifies the peer server To create the NTP configuration informationNTP Object ntp Specifies the authentication key number used for accessing Default No authentication key Range of Value DecimalPeer server. The key number must be the one defined by Time servers definedIPAddrss Ignores all accesses from the specified host Ignores all the NTP Mode 6 and Mode 7 packets sent fromSpecified source. Time service with that source continues NTP Mode 6 and Mode 7 packetsEnables the authentication key definition DefaultOffDefaultNo authentication key Range of value Up to 30 Ascii charactersNTP specifications of GR2000 are based on RFC1305 Operation Management Information Related StandardsGR2K-GA-0014 Radius Radius server information Default Uses port number Range of Value 0 Default Priority is not set Range of Value NoneDefault Sec Range of Value 1 Used the specified Radius server with priorityPage Deleting all Radius information Servers per deviceCreate board disablement definition and show the result Board Disablement Object disableTo create board disablement definition Precautions Default Configuration Objects DefaultConfig# Direction Related Configur tion ObjectInformation Information Name Initial Value Group Name Values during Initial InstallationSnmp Information Line Information Ethernet/Gibabit Ethernet 100BASE-LHLine Information WAN Disable -t3scrambleoff Line Information WAN OC-POS Refer to GR2000 Configuration Commands, universal Line Information ATM Subline Information WAN PPP Information PPPoE Information Frame Relay Information Initial Values during Initial Installation 48163264 ATM InformationOperation Management Information Parameters GFR2Default Isdn Information Japan OnlyCalls are suppressed Information Name Initial Value Tunnel Interface InformationInformation Group Name IP Interface Information ARP NAT-PT Information IPX Information NAT-PTIpx filter Bridge information QoS Information AttributeDesignation of queuing priority class for bridge Filter Information Router-default Router-defaultExample Related Configuration Object Configuration Error Messages Common Configuration Error MessagesMessage Contents Router Control Information Error Messages Router Control InformationNetwork Interface Error Messages Network InterfaceAttempt made to delete interface specified by QoS bridge Configuration Information Can not delete vc configuration with QoS NIF Invalid phone number Definition information name PCR No greater than 6144 kbps Network Interface Error Messages IP Information Error Messages IP InformationAn IP that has a VLAN-defined IPv4 address already set That VLANs in the same RP are unique Number of IP addresses exceeded maximum value. Decrease Local address for router information It is not possible to set IPv4 addresses in 6to4 tunnels Routing Protocol Error Messages Routing ProtocolAggregate linklocal address should be Attribute-list invalid BGPBGP4+ metric Option is peer Is not found. Use a defined interface address Peer type Passive option in the local peer Declaration only As peer group option Bgp This peer address Peer matches Bgp4+ invalid hold time value at ’Value’ not Peer must be agreed with the AS number of the own device Should not be v4-compatable Number At Value not in range 0 to Value Specified communities value Does not overlap with specified mask Than the local host address Configuration Error Messages Mask1 Lower limit of specified risk range Configuration Error Messages Shorter than prefix mask Mask2 Characters or hexadecimal 32 digits GR2K-GA-0014 Ospf invalid retransmit-interval value at He OSPFv3 domain number is duplicate-defined. Do not Stub parameter in backbone area Vpn specification range is invalid Ripng invalid aging time value at ’Time’ not GR2K-GA-0014 Value Extended community number Route-filter syntax error Syntax error Static address should not be v4-compat GR2K-GA-0014 Relation between the local address, and the IP address Multicast Router Control Information Error Messages Multicast Routing ProtocolLocal address, specify the defined interface address. Do not Igmp Interface not found at Address Group address mask Mask Mask Mask Multicastduplicate group address clause DVMRP, IGMP, Dvmrptunel Pim can not set interface address at Num Definition is wanted, add it using the following procedure Definition does not exceed the value Num2 specified for IPv6 Multicast Router Control Information Error Messages IPv6 Multicast Routing ProtocolDefinition Flow Information Error Messages Flow Information Error MessagesThen delete the band setting or minimum band guarantee. Band assurance burst size, set the minimum band assurance Rewriting value, delete output priority or queuing priority Value, dscp rewritten value, tosmap, dscpmap, contract band Vlan priority rewrite value Band setting, delete the maximum band restriction or To the maximum band limitation burst size Each other Simultaneously. Specify the respective settings individually Dscp rewrite value or dscpmap has been defined. To set Can not set upc because group is already Shaper configuration Filter and QoS Information Other than Flow InformationValue has set yet Destination network class and sub-network class An interface except the already set ATM line QoS IP list group entry number not specified Delete specification of the UPC penalty TOS modified value Allocation control traffic 10 Mpls Information Error Messages ROUTE-OS7 Mpls InformationThis is a duplicated definition of the to parameters Name is incorrect. For lsp and secondary lsp, designate One already defined for labelswitchedpath. To delete from IP address is a duplicated definition 11 IPX Information Error Messages IPX InformationFiltering unique Not exceeding the set number of entries. To add entries, use 12 Bridge Information Error Messages Bridge Information13 Vrrp Information Error Messages Vrrp Information14 Snmp Information Error Messages Snmp Information15 Cops Information Error Messages Cops Information16 Radius Error Messages Radius17 Operation Management Information Error Messages Operation Management Information18 Address Translaion Information Error Messages Address Translation InformationMaximum specifiable count of 1 rule 19 Dhcp Server Information Error Messages Dhcp Server Information20 Dhcp Client Information Error Messages NAT-PT Error MessagesDhcp Client Information NAT-PTDNS Resolver Information Mail Sending InformationOther Error Messages 25 Other Error MessagesGR2K-GA-0014 103 Ver Configuration file do not modified to standby GR2K-GA-0014 105 Ver Syntax error line Line No Index Index-2 Index