Deleting all Radius information | Hitachi GR2000 Series manual

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

4.Deleting parameters:

Deleting the RADIUS server port number of IP address 192.168.10.1 and reverting to the default value.

	Deletingradiusthe resend192.168count.10.1designation--authportin RADIUS connection information.
(config)#			showradius
radiusyes				{	DIT974J?FR63KKDIEKSW6";
			8.		DIT974J?FR63KKDIEKSW6";
5. Deleting RADIUS se ve
Deleting the RADIUS server of P address 172.16.100.1.
	1927	.16.10.1{
	};	key"Okdf8dL#LIdjei87+e";
	};	pri		mit3;
	retransmeout			mit3;
};	retransmeout				ary;
};			radius--retransmit
			radius--retransmit
	Deleting all RADIUS information.
(config)#			showradius
radiusyes				{
			8.		DIT974J?FR63KKDIEKSW6";
Rel ted1927Configuration.16..1{Object
	};	key"Okdf8dL#LIdjei87+e";
	tmeoutprimary;100
Pre};au ions
router1. (confg)#radiusyes{};(config)#nosuchraThere192};tmeoutis.key168deleteshowshowdmaximeleteradiusius.."Aodiug10;radius1{radiusradiusm-cl3*%63j9d";of 4 172settable.16.100RADIUS.1						servers per device.
4-30						GR2K-GA-0014
						Ver. 07-02

Image 360

Hitachi GR2000 Series manual Deleting all Radius information, Servers per device

Contents

Hitachi Gigabit Router GR2000 Series Enhanced Version GR2K-GA-0014 Ver Ver Release 06-05 December Change RecordPreface GR2K-GA-0014 GR2000 Gigabit Router Series Documentation Title Description/Notes Part Number Abbreviations GR2K-GA-0014 Ver Boot Strap Router Common Open Policy ServiceCoS Class of Service Carrier Sense Multiple Access with Collision Detection Guaranteed Frame Rate Integrated Services Digital NetworkInternet Service Provider Frame Check Sequence Viii GR2K-GA-0014 Ver Network Service Access Point Operation Administration and ManagementProtocol Independent Multicast-Dense Mode Protocol Independent Multicast-Sparse Mode Product Support Service QoS Quality of Service Router AdvertisementService Access Point Service Advertising Protocol Switch to Switch Protocol Switched Virtual Channel ConnectionType Of Service Weighted Fair Queueing Acknowledgments Xii Bsdi Internet Server Xiii AT&T David M. GAY Xiv INFO-ZIP Group SUN MICROSYSTEMS, INC Xvi Wildboar Copyright 1995 Frank van der Linden. All rights reserved Xviii Theo DE Raadt Diff, grep Tcpd Los Alamos National Laboratory Xxii Apache Http server Xntp Program Xxiv Mrouted PIM sparse-mode pimd Xxvi Xxvii Ver General Safety Guidelines Damage to the equipment or a disruption in service Specific Warning Instructions Xxx To avoid damage to the equipment or a disruption in service Specific Caution Instructions Cleaning Other InstructionsStorage For users in the UK and Denmark Table of Contents Bridge Objects Snmp ObjectsHost Name Information Log Information 100 101102 GR2K-GA-0014 Iii Ver Index 132 133134 177 This page left intentionally blank GR2K-GA-0014 Vii Ver 111 112117 118 165 166169 170 Default Values During Initial Installation NAT-PT Error MessagesDNS Resolver Information Error Messages Log Information Error Messages Chapter Flow Information 1 IPv4 Flow ControlRange of QoS, Filter-Flow Control Filter function on the first input side stage First input side stage executes the following functionsPacket in accordance with the flow Defines using and unusing of each control Filtering/QoS Information Constituting Definition Iinput Form 2 IPv6 Flow Control Constituting Definition Input FormQos-ip-list, qos-ip-list-group, qos-ip Flow filter Features of a flow filter input format are listed in Table Features of a flow qos input format are listed in TableConfiguration Input Format Interface Types that Support Flow Control Interface Name IPv4 IPv6Input Output Side Setting the information Flow Flow InformationInput Form Types of action Flow control Effect Be changed when copsyes is set in the cops configuration Which a Cops agent function can be set to all RPs. It cannot √ Setting possible Setting not possible Supported L2 UPC functions for each RP type Priority Conditions Queue Conditions WAN State of IP Output Priority *1 *2 Packet Type Flow Queuing Detection Priority Conditions Queue ARP ARP Request/ARP Response packet By this router Layer 2 packet generated by IP header Definition Does not Coincide GR2K-GA-0014 Ver ROUTE-OS7 Priority Discard threshold User priority Send queue number Fu ction can be set Sett ng L2 UPC functionsOut Action Rela ed Commands Pre autions Flow filter Filter Flow Information RP-C, RP-C6 20 Maximum Definable Entries by Each PM Mounting Memory Size When all high order protocol is target Flow filter IPv4Flow detecting condition and the operation Changing only the operation designation Deletion of the information Range RP-C6, RP-D6 GR2000-1BGR2000-2B Filtering/QoS Information 22 General Protocol Number Protocol No Upper Upper limit of the IP user data length is designated Lower Lower limit of the IP user data length is designated Sets the Vlan ID of tag-VLAN List information that sets this parameter should be setInbound and specified as the flow detection conditions on Input side 25 General Icmp Type and Code Nnumber 26 General Icmp Type NumberType Name Code Type Name Default -forward None Operation ParameterInterface name set in the information. Refer toTable 27 List of Interfaces Supporting Flow Control Default -forward Range of value 0 to GR2K-GA Packet Type Limited Filtering Item Forward Insertion Ists Chan of pa ameters Ignati n FilterNdition and the operation List Anyaciondrop Tokyo Ti n par meter Let on of operati n d s gn Indication Indication in input/output interfDisplay of blank Numb1 Indicate Related Commands Related Informati n Flow filter IPv6 ROUTE-OS6 Input FormatIndication of the information Indication of a blank list number in the specified range Indication of top blank list number in the specified range Parameter GR2000-2B Main Item Sub-Item Input Output Side This command. The RM Ethernet is not supported. For details Default No default is possibleSubject interface name set in the IP information or IP-address information is designated. The IP information or 30 General Protocol Number If all IPv6 addresses are designated any UpperUpper limit of the IP user data length is designated LowerLower limit of the IP user data length is designated Result General Port Number None No default is possible when designating the operation 33 General ICMPv6 Type and Code NumberOperation Parameters Parameter at the head of the whole operation parameter 34 List of Interfaces that Support Flow Control Interface Name Availability of Support Flow Rward Ver Tokyo Config# Ction Yes Pa ameter n for Cnfig#showflowfilter Deletion n list un t 3ffe501811ff0111 Display of blank Display of top blank list number in all Filtering/QoS Information Related Commands Flow qos QoS Flow InformationRelated Information SetflowqosInterfaceNameinout-disable Flow qos IPv4 Value Indication of blank list number the specified range Parametersminno Parameter Main Item Sub-Item Input Output Side Only GR2000-1B, GR2000-2B and GR2000-2B+ can be set Filtering/QoS Information Flow Control Operation Parameter Parameter 38 General protocol number IP User Data Default None Range of value 0 to 40 General Icmp Type Code NumberDescription Specifies the Igmp type Port Dumber Name Decimal Range of value To 255 ten-decimals. Please refer to Table 41 Genral Igmp Type Code NumberGeneral Icmp type number Page Filtering/QoS Information 43 Relationship Between Number of Queues and Priority Packet Specifies the queuing priority after having been changed. If Relationship Between Number of Queues and Priority 45 Number of Entries Used per List by Each Setting Setting Contents Setting Parameter Number Entry Flow Tokyo and the transmitter addresses Wflw QosTokyo1out Inserting t List QosTok Unit Delete Put/output interface unit Out Erface Tok o Flow qos IPv6 ROUTE-OS6 Filtering/QoS Information Related Information Minno Indication of blank list number in thespecified range Filtering/QoS Information Parameter Parameter GR2000-1B/2B Main Item Sub-Item Input Output Side User priority rewrite Replaceuserpriority 47 Operating Parameters that Can Be Set for Each Operation Operation Parameter Flow Control Command. RM Ethernet and Tunnel interface are not Out Outbound specification of the frame output sideOr ip-address information. The ip information or Ip-address information should be set before inputting this Flow Detecting Condition Parameters 48 General Protocol Number Default No default is possible Range of value IPv6 address All IPv6 addresses are designated anyTo be designated is Upper limit of the IP user data length is designated Specifies the transmitter port numberIf port to be specified is one nnnnn Range of value To 65535 decimal. Please refer to Table 50 General Icmp Type Code Number Specifies the IGMPv6 type51 General IGMPv6 Type Code Number Port Number Decimal Name Default None Range of value 0 Filtering/QoS Information 51 General IGMPv6 Type Code Number Default None Range of value 0 to Range Penaltydrop-penaltydiscarddNo.-penaltydscpDSCPValueVer.07-02 53 Relationship between number of queues and priority 54 Number of Entries Used per List by Each Setting Examples Nlist4001ip Specifies that packe Config# Conf ig# Cnfg#showflowqosTokyoout Conf List List 103 List401ip Displaying Unit 105 40002-60000 Display of top blank list number Filtering/QoS Information Precautions GR2K-GA-0014 107 VerConstituting Definition Inputting Form Filter Function Ort Ressed to this outer To create or modify the filter list information To show the information Subcommand To show the first free entry No56 Applicable Parameters by Upper Protocol GR2K-GA-0014 111 Ver Specifies the value of high-order 6 bits in the TOS field Packet. The low-order 2 bits are ignoredCorresponding Values tos Value Default On Setting byFiltering/QoS Information Corresponding Values Diff-serv GR2K-GA-0014 113 Ver -portpairoption checks for not switching and for -portpairoffoption only checks for not switchingProtocol port number. The -portpairoption requires setting Synchronized pair switch for the IP address upper When specifying port numbers within a range Only checks for not switching sourceNumber. However, when -ippair or -portpair is specified Checks for not switching source IP GR2K-GA-0014 60 Combination of Pair Switch 61 Combined Setting of Pair Switch and Possibility of UseCombination of Pair Switch Setting Processing GR2K-GA-0014 117 Ver Default -ack off Range of value Default -syn off Range of value NoneDefault Undefined Range of value Specifies the Icmp code number in decimal 63 Igmp Type NumberGR2K-GA-0014 119 Ver Igmp Type No. h Input Value Decimal Name 64 ReplaceTOS Field Rewriting Example Air Ilt Delete parameters of filter list information Show filter list number 2 information 123 Setfilter- groupFilter-Group-NameFilterListNo Before entering this command Default Undefined mandatory input Range of value 1024To delete the filter group information Insert filter GroupFilter Groupip1 Ins t the con iguration information Configuration Objects Delete filter list number 9 of filter group name ip1Under which packets are relayed Group being used in the filter interface cannot be deleted To create the filter interface information Filterinterface Specifies the target interface name predefined by the ip or128 GR2K-GA-0014 Filter interface Group 129 Related Co Pre aution Quality of Service QoS Objects Transmission control Qos-ip-list, qos-ip-list-group Flow filter Qos-ip-list Qos-ip-list-group GR2K-GA-0014 133 Ver Setting information No disable1 qos Non-IP protocol QoS control Yes enable Setting QoS parameters To enable flow controlThis parameter uses all interfaces by a Cops function GR2K-GA-0014 135 Ver Office1 DesQoS inf rmation have been specified Qos yes Qos no GR2K-GA-0014 137 Ver Setting/modifying information Qos-queue-list 67 shows parameters to be set per queue mode 67 Parameters To Be Set Per Queue ModeRound-robin scheduling Minimum bandwidth guarantee Output priority control 68 Maximum Range of Send Bandwidth GR2K-GA-0014 141 Ver Queue Control Send Control MediaLayer Protocol Queue mode It is invalid in -priority or roundrobin mode. BandwidthAllocation is determined by the line rate set this as a Less and indicate at least one queue within Number equally. Sets only when queue mode is Equalbandwidth. Invalid when queue mode is -priorityRoundrobin, -bandwidth, -bandwidthkbps or Bandwidthtraffic Maxqueue Maximum queue count is Maximum queue count is 64*1 ROUTE-OS6B GR2K-GA-0014 145 Ver Support Parameter 10BASE-T 100BASE-TX 1000BASE-LX 1000BASE-LH GR2K-GA-0014 147 Ver 10BASE-T 1000BASE-LX 1000BASE-LH Setting parameters To set the queueA mode for priority To queue1 and 80 percent toBandwidth To set minimum Ue-st 149 List Ettings To display all sett ngs To delete Set can be Leted by sp cifying pa amet r nameQueueA Min 152 Queue Qos-interface 75 Parameters That Can be Set by Each Transmission Control DefaultNone only the displayed value is supported Filtering/QoS Information Parameters76 Interface Names GR2K-GA-0014 155 Ver NEB1G-1B can be set at up to 590 Mbit/s List When t Filtering/QoS Information Examples Center Traffic Lineinterface Line center ethe GR2K-GA-0014 159 Ver 160 To display all ettings Ver 161 GR2K-GA-0014 162 Dele Grup GR2K-GA-0014 165 Ver Discard Mode Default3 Range of valueDiscard Priority Class Mode Qos-discard-mode Setting parameters To set discard mode 2 on NIF number To delete t e NIF Mode TtingDeleting Mod fying paramete s To change Free Displaying the first free entry No GR2K-GA-0014 169 VerFlow-Detection Parameter Upper-Level Protocol Unspecified Other This parameter specifies the QoS IP frame condition list Flow Detection Condition ParametersCondition Flow Control Parameter Limits LimitThis parameter specifies values corresponding to High-order bits in a TOS field or a DS field of Diff-serv, They overlap, set an IP address pair switch as ip-pair-off Address is specified as -ipsource IP Address. An addressBoth source and destination IP addresses are set under one Single address is specified GR2K-GA-0014 173 Ver Default None Icmp type is not a flow detection condition This parameter specifies the Icmp type85 List of Igmp Type Number Igmp Type No. HEX Input Value Decimal Name This parameter specifies an EXP field value. The number Flow Control ParametersFlow control parameter GR2K-GA-0014 175 Ver Default Operation Change Method GR2000-1B and GR2000-2B 87 UPC Combined Setting Sequence Combined Setting Setting SequenceGR2K-GA-0014 177 Ver Protection Maxpriorityclass 8 The maximum output priority isMaxpriorityclass 16 The maximum output priority is Maxpriorityclass 32 The maximum output priority is Default Range of value Greater Discard priority88 Range of Priority Class and Discard Class GR2K-GA-0014 179 Ver 180 GR2K-GA-0014 Ver Range of Priority Class and Discard Class 90 Combination of Pair Switch 91 Combined Setting of Pair Switch and Possibility of Use Delay Throughput Reliability TOS NumberFormula to calculate the TOS number is TOS Number Calculation Setting Value Replacing Mapping of Class No. and Queue No. Max Output Priority isQueue No Class No Queue Count Matched Unmatched GR2K-GA-0014 185 Ver Sets only when output line protocol is frame relay 96 Mapping of Class No. and Queue No. Max Output Priority is Source IP address Replacetos 240 -upc 1000000 -upcpenalty drop Maximum limitat Tec ion Flow detectionIon parameter of important packet RedGroup Config Flow detection Ndi ion parameter of prio ity packet189 No1 Modify parameters Rlace To display optional QoS IP frame condition list Delete se 97 Packet Type GR2K-GA-0014 193 VerPacket type Output Priority Queuing Deleting settings 194 Display ng Insert ng e Qos-tos-map Dele e Settings Default See table belowDefault See table below Range of value GR2K-GA-0014 197 Ver 198 Mapping of TOS Value and Output/Queuing Priority Class Hatching part is RFC’s recommended valueGR2K-GA-0014 199 Ver Output Queuing Modifying param ters To change the-ueuing Precedence TosDeleting ttings 200 For the flow control, refer to the GR2000 Applications Guide 201 Display settings Default Cannot be omittedInbound setting frame input side Outbound setting frame output side Config# To delete inboundPre Auti Ver.07-02 Line=0 Default4 Range of value Qos-ipxGR2K-GA-0014 205 Ver Lay the name f the optional interface Deleting settings Mod fying ArametersTo hange the qu u ng prior Office1 Display ng sett ng To d s Lay All Precaution 207 Mod fying parameters Displaying settings a. To display all If this commandTo delete t Discard 2class Nterface Name4 Office1 GR2K-GA-0014 209 Ver Number Default Parameter sets the output priority class. In the caseOutput priority control, used as the output priority class. Case of bandwidth and round-robin, used as queue Deleting etting To delete t Settings Displaying Etting To disp ayDeleting param ter Shaper shaper transmission information Case of output priority control If the queuing mode is not omitted Set Parameters for each queuing mode Supported 101 Default length of each queue Queue number Default queue lengthParameter 1000BASE-SX Description 1000BASE-LX 1000BASE-LH Displaying Setting information Fair queuing 4WFQ Tting VLAN3 in we gh Displaying random Vlan line name settings Del Ing set ing informationPre Ution Ntee ethe specified bandwidth if the flow control Cops Cops 102 Allowable Characters GR2K-GA-0014 219 Ver Default3101 Range of value 0 to 65535 decimal Default 3101This parameter sets the server password encryption key Set copspassword when setting this parameter Default Bytes Default3 Range of value 0 toGR2K-GA-0014 221 Ver Display ng setting information Chan ing Related Commandsrimary Deleting parameters Definition of Cops is deleted 224 IPX Objects 1 ipxThis sets the operation information for IPX routing This parameter determines whether the IPX routing this Default20 Range of value Splay the content of the definitioChan e paramet rs Ange the IPX routing operati to D sable Setting information Changing information Ipx-interfaceIPX/Bridge Information This parameter specifies the interface name to be set. Pay When the specified interface is ATM, WAN frame relay, or Default None cannot be omittedThis parameter is the forwarding switch when the diagnostic Do not forward Forward diagnostic packet Default Send SAP packet Default Send RIP packetDoes not deliver this packet periodically Range of value 1-0xfffffffe in IPX Address Reply NetworkInterface Network Sett ng Priodic To play Pt onDel Terface Delete settings Default Cannot be omitted Range of valueIs used Description This specifies the node address MAC address Vpvc1 This command allows setting of the IPX static route Static-routeRegistered static routing entry Forwarding destination of the IPX packet attached to To the destination network based on the number of ticks Among the routes to the destination network, the one withSmallest number of ticks has priority Erting parameters Deleting set ings Related Comma dsIs xecuted, and the changed IP routing protocol This command sets the static SAP information Static-sapNumber. The reference values are shown in -1 below Server Type Reference Values Type Server Type Examples000000000001-fffffffffffe Atic Address ntwok444444443333333333 To display Hop Pre aut ons Outing p otocol information, and Mpls information areReflected to the ope ation Inserting settings Parametersshowrip- No Displaying settings To display al To d s Lay opt ons for RIP filtering en ry numberInfo mation entry number Ameter Ap ly command is not being executed, the apply subcommand is Prot col informa Filtered using a 4-digit hexadecimal number Default Specifies all interfaces DefaultNetwork address xffffffff specifies all interfaces Default Filtering to be applied to receiving packets Default To insert new information Displaying Tings To dis Lay al Prot col info Information, IP multic st rouReflected to the p Ion Is donebefore the IPX packet is transmitted Changing settings Using 2-digit hexadecimal numberRange of value 0-0xff Range of value 0-0xffffffff Sockefiltering2forwardprotocol Ing parame To ch Filt ildr Inserting par Meters Reflectedconfig#to thedeleteipxoperat on-. filter1-network If this command Is input d Bridge ObjectsBridge Object for display of the Bridge information You can define the bridge interface configuration Bridge-interfaceDefining Default-enable Or more interfaces on the same bridge are connected toSame network Frame format described here is only for MAC Conf Uration display To display all To display spec fic information Conf Ion deletionHe bridge-interface of interface sk2 Delet ng param te s IPX/Bridge Information Related Commands Default300 Range of value 10-1000000Filtering-database Interface address. It also deletes the frame when receiving Sets the static entry MAC address to register withFiltering-database in canonical representation This sets filtering drop deletes all frame destinations Extended-filtering Delete Configure as filter1, then as filter2 and filter3 Type field when the format is EthernetNo information Recipient MAC address 6 octet This parameter configures bit patterns hexadecimal that Configures bit patterns hexadecimal that check filteringDefault Range of value 0-0xffffffffffff Filtering. This is valid only when chosen type is user Displaying setting information a. Display all information Executed before He commandDisplay Speci c information Del ting s ing Nform tion To delete Default32768 Range of value Default Seconds Range of valueSpanning-tree Displaying information To del te t pr ority IPX/Bridge Information Precausion This page left intentionally blank Snmp Objects SnmpApplication of Snmp Information Objects To create or modify an Snmp Manager Default Read Range of value Read or read-write Manager. When none is specified, no trap is performed. WhenIs specified, the standard trap is enabled. When extrap is Enabled. The individually specified trap is issued when Default Protocol Range of value Interface or Is specified Parameter Moment at Which coldstart trap is IssuedParameter Moment at Which link up/down trap is Issued Snmp Information Trap System Message Levels Default Standard Range of value Or standard is specified Mode is selectiontrapParameter Moment Which link up/down trap is Issued Mthe Traprtransmission mode is selectiontrap Snmp Information GR2K-GA-0014 Related Configur Spec fied trap are issued when selectiontrap isDisplay register status of Snmp Manager Default50 Range of value History-controlTo create an Rmon Ethernet history-group control entry Specifies the Rmon Ethernet history-group control index Default 1800 Range of value 3600 Ethernet history events. This parameter corresponds toRFC1757 For allowable characters Wner Related Configu a ion Object Buckets Alarm To create an Rmon Ethernet alarm-group entrySpecifies the Rmon Ethernet alarm-group index number. This Threshold. This parameter corresponds to alarmVariable Threshold. This parameter corresponds to alarmInterval Corresponds to alarmSampleType of RFC1757Default Range of value Falling AlarmRisingThreshold of RFC1757 Is not issued. This parameter corresponds to AlarmFallingEventIndex of RFC1757This setting. This parameter corresponds to alarmOwner Short of the falling threshold. Such index number must be Snmp Information Show the resulting alarm-group entries Alam Alathreshold Net history group can be referenced using an Snmp Make sure that Settings areVabl Related Conf gu ion Objec Event To create an Rmon Ethernet event-group entrySpecifies the Rmon Ethernet event-group index number. This Event. The trap option causes transmission of Snmp trap to Example Howeve Related Configu a ion Objects Show the registration status of Rmon event-group entryEvent-group entries Latter Host Name Information HostsTo create a host name entry Displa ing the configura ion information Create a host name entry and show the result IPv4Create a host name entry and show the result IPv6 Operation Management Information Precautions Dns-resolver To delete domain name Validity of DNS resolver Operation Management Information Dele On of setDele DNS resolver information Effectuation He DNS relay Effectuates the DNS function GR2K-GA-0014 Log Information Logger-syslogNetwork by the following methods Setting of log syslog information Syslog informa Del tion Setting f Ou puttingA notice level Displaying Logger Co fi Logger-email Re ated Commands Mail nformation Te the etting to send Event levelTting information Show ng Rmati n Logger-email-fromLog E-Mail Transmission Source Information To set information Logger-smtp Log E-Mail t ansmission source inf rmation is displayedGinning To set information To delete information Re ated Command Operation Management Information Parameter GR2K-GA-0014 Setting information Setting enable/disable Report e-mail report informationSets whether or not to use the -mail report function Specifies the local e-mail address Sending -mail reports Specifies the Smtp server port number for sending e-mailReports Standard value Operation Management Information Example Related Configura ion Object That enables -mail transmissions via the InternetDefinitions Operation Management Information To create the NTP configuration information NTP Object ntpThis set of parameters specifies the peer server Specifies the authentication key number used for accessing Default No authentication key Range of Value DecimalPeer server. The key number must be the one defined by Time servers defined IPAddrss Ignores all accesses from the specified host Ignores all the NTP Mode 6 and Mode 7 packets sent fromSpecified source. Time service with that source continues NTP Mode 6 and Mode 7 packets Enables the authentication key definition DefaultOffDefaultNo authentication key Range of value Up to 30 Ascii characters NTP specifications of GR2000 are based on RFC1305 Operation Management Information Related Standards GR2K-GA-0014 Radius Radius server information Default Uses port number Range of Value 0 Default Priority is not set Range of Value NoneDefault Sec Range of Value 1 Used the specified Radius server with priorityPage Deleting all Radius information Servers per device Board Disablement Object disable To create board disablement definitionCreate board disablement definition and show the result Precautions Default Configuration Objects DefaultConfig# Direction Related Configur tion Object Values during Initial Installation Snmp InformationInformation Information Name Initial Value Group Name Line Information Ethernet/Gibabit Ethernet 100BASE-LH Line Information WAN Disable -t3scrambleoff Line Information WAN OC-POS Refer to GR2000 Configuration Commands, universal Line Information ATM Subline Information WAN PPP Information PPPoE Information Frame Relay Information Initial Values during Initial Installation 48163264 ATM Information Operation Management Information Parameters GFR2 Default Isdn Information Japan Only Calls are suppressed Tunnel Interface Information Information Group NameInformation Name Initial Value IP Interface Information ARP NAT-PT Information IPX Information NAT-PT Ipx filter Bridge information QoS Information Attribute Designation of queuing priority class for bridge Filter Information Router-default Example Related Configuration ObjectRouter-default Configuration Error Messages Configuration Error Messages Message ContentsCommon Router Control Information Error Messages Router Control Information Network Interface Error Messages Network Interface Attempt made to delete interface specified by QoS bridge Configuration Information Can not delete vc configuration with QoS NIF Invalid phone number Definition information name PCR No greater than 6144 kbps Network Interface Error Messages IP Information Error Messages IP Information An IP that has a VLAN-defined IPv4 address already set That VLANs in the same RP are unique Number of IP addresses exceeded maximum value. Decrease Local address for router information It is not possible to set IPv4 addresses in 6to4 tunnels Routing Protocol Error Messages Routing Protocol Aggregate linklocal address should be Attribute-list invalid BGPBGP4+ metric Option is peer Is not found. Use a defined interface address Peer type Passive option in the local peer Declaration only As peer group option Bgp This peer address Peer matches Bgp4+ invalid hold time value at ’Value’ not Peer must be agreed with the AS number of the own device Should not be v4-compatable Number At Value not in range 0 to Value Specified communities value Does not overlap with specified mask Than the local host address Configuration Error Messages Mask1 Lower limit of specified risk range Configuration Error Messages Shorter than prefix mask Mask2 Characters or hexadecimal 32 digits GR2K-GA-0014 Ospf invalid retransmit-interval value at He OSPFv3 domain number is duplicate-defined. Do not Stub parameter in backbone area Vpn specification range is invalid Ripng invalid aging time value at ’Time’ not GR2K-GA-0014 Value Extended community number Route-filter syntax error Syntax error Static address should not be v4-compat GR2K-GA-0014 Relation between the local address, and the IP address Multicast Router Control Information Error Messages Multicast Routing Protocol Local address, specify the defined interface address. Do not Igmp Interface not found at Address Group address mask Mask Mask Mask Multicastduplicate group address clause DVMRP, IGMP, Dvmrptunel Pim can not set interface address at Num Definition is wanted, add it using the following procedure Definition does not exceed the value Num2 specified for IPv6 Multicast Router Control Information Error Messages IPv6 Multicast Routing Protocol Definition Flow Information Error Messages Flow Information Error Messages Then delete the band setting or minimum band guarantee. Band assurance burst size, set the minimum band assurance Rewriting value, delete output priority or queuing priority Value, dscp rewritten value, tosmap, dscpmap, contract band Vlan priority rewrite value Band setting, delete the maximum band restriction or To the maximum band limitation burst size Each other Simultaneously. Specify the respective settings individually Dscp rewrite value or dscpmap has been defined. To set Can not set upc because group is already Shaper configuration Filter and QoS Information Other than Flow Information Value has set yet Destination network class and sub-network class An interface except the already set ATM line QoS IP list group entry number not specified Delete specification of the UPC penalty TOS modified value Allocation control traffic 10 Mpls Information Error Messages ROUTE-OS7 Mpls Information This is a duplicated definition of the to parameters Name is incorrect. For lsp and secondary lsp, designate One already defined for labelswitchedpath. To delete from IP address is a duplicated definition 11 IPX Information Error Messages IPX Information Filtering unique Not exceeding the set number of entries. To add entries, use 12 Bridge Information Error Messages Bridge Information 13 Vrrp Information Error Messages Vrrp Information 14 Snmp Information Error Messages Snmp Information 15 Cops Information Error Messages Cops Information 16 Radius Error Messages Radius 17 Operation Management Information Error Messages Operation Management Information 18 Address Translaion Information Error Messages Address Translation Information Maximum specifiable count of 1 rule 19 Dhcp Server Information Error Messages Dhcp Server Information 20 Dhcp Client Information Error Messages NAT-PT Error MessagesDhcp Client Information NAT-PT DNS Resolver Information Mail Sending Information Other Error Messages 25 Other Error Messages GR2K-GA-0014 103 Ver Configuration file do not modified to standby GR2K-GA-0014 105 Ver Syntax error line Line No Index Index-2 Index