Hitachi GR2000 Series manual Parameter sets the output priority class. In the case, Number Default

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Input Format

Settings

Changingset]qosdiscard-settings:-clas<Nohdlc-paspassthrough.>] {<LineName>}[-<DLCIpriorityName>class<No<VCName>.]

Deleting[	settings:
DisplayingName><TimeslotName><Peerdeltesettings:qos-hdlc- [{<Line					<Group
Parametersshowqos-hdlc-passthrough				]
{ <Line Name> <DLCI				<Group Name>	<Timeslot Name>
<Peer Name> }
Description:		This parameter sets the relevant interface name established in
		the bridge interface settings. (Before entering this command,
		establish the bridge interface settings.)			Only a WAN interface
		can be specified. The HDLC passthrough QoS information of
		LAN and ATM interfaces operates with the value set using
		qos-bridge.
Default:		Cannot be omitted
-priorityDescription:class<No.This>			parameter sets the output priority class. In the case of
		output priority control, used as the output priority class. In
		the case of bandwidth and round-robin, used as queue
		number.
Default:		4	<VCName>
Range of value: 1-8
-discardDescription:class<No.>This parameter sets the queuing priority class.
Default:		4
Range of value:		1-4

1-210	GR2K-GA-0014
	Ver. 07-02