WARRANTY

The Lincoln Electric Company (Australia) Pty Limited (“Lincoln”) warrants all new machinery and equipment (“goods”) manufactured by Lincoln against defects in workmanship and material subject to certain limitations hereinafter provided. Certain conditions warranties and obligations are implied by law (for example under the Trade Practices Act 1974) and cannot be excluded or modified (“the statutory warranties”).

Where the statutory warranties do apply then any express warranties given by Lincoln (the “express warranties”) are given in addition and without derogation from the statutory warranties. Apart from the express warranties and (in cases where they apply by law but not otherwise) the statutory warranties Lincoln gives no warranties whether express or implied by operation of law or otherwise in respect of any goods manufactured or supplied by Lincoln or by its authorised distributor.

Any warranty whether express or statutory and the term of any such warranty as set out herein commences on the date Lincoln or Lincoln’s authorised distributorship forwards the goods from the premises of Lincoln or Lincoln’s authorised distributor to the purchaser.

In respect of any claim under the warranty herein provided a purchaser must furnish Lincoln with written notice of any claim under the warranty within the time period of the warranty as further specified herein.

The extent of Lincoln’s warranty whether express or statutory is limited to a liability to repair, replace or pay to the purchaser an amount equal to:

a)The cost of replacing the goods;

b)The cost of obtaining equivalent goods; or

c)The cost of having the goods repaired, whichever remedy in its absolute discretion Lincoln chooses.

Upon request by Lincoln the purchaser must permit Lincoln to inspect the goods the subject of any claim under this warranty and Lincoln may at its absolute discretion repair or replace the goods F.O.B. at its own premises or at such other premises as Lincoln may designate provided that all freight charges to and from Lincoln’s premises or such other premises as Lincoln may designate shall be paid by the purchaser.

Period of Warranty

The period of warranty in respect of goods covered by this warranty shall be as follows:

a)In respect of manual and semi-automatic and fully automatic wire feeders and welders (except belted, engine driven welders and alternator sets) - 3

years from the date of commencement of the warranty;

b)In respect of the Invertec V130-S inverter - 1 year from the date of sale.

c)In respect of belted, engine driven welders and alternator sets designed for operating speeds under 2,000 rpm - 3 years from the date of commencement of the warranty;

d)In respect of Tractapac mobile rural welders mounted in approved fixtures - 3 years from the date of commencement of the warranty;

e)In respect of belted, engine driven welders and alternator sets designed for operating speeds over 2,000 rpm - 2 years from the date of commencement of the warranty;

f)Other goods manufactured by Lincoln including gun and cable assemblies, undercarriages, field installed options, unattached options, welding supplies, standard accessory sets and replacement parts -1 year from the date of commencement of the warranty;

g)In respect of all alternators irrespective of the manufacturer of those alternators - 12 months in respect of labour and parts from the date of commencement of the warranty;

h)To the extent permitted by law Lincoln shall be entitled to in its absolute discretion repair all engines and engine accessories however Lincoln shall not be held responsible for any such repair which shall be the sole

responsibility of the engine manufacturer which provides for warranties for the period and subject to any limitations provided for by those manufacturers of the respective engines and engine accessories.

At the date of this warranty the details of those manufacturers warranties are as

follows:

 

 

 

Engine Manufacturer

Labour

Parts

i)

Perkins Engines and Accessories

*24 months

*24 months

 

(The Perkins Distributor Organisation

*Subject to conditions

 

provides all warranty service (accessories

imposed by Perkins

 

included) for the Perkins Engines powering

 

 

 

goods manufactured by Lincoln.)

 

 

ii)

Onan, Lombardini, Kubota &

12 months

12 months

 

Ruggerini Engines and their

 

 

 

Accessories

 

 

 

(warranty service can only be carried out by

 

 

 

authorised Lincoln Field Service Shop or

 

 

 

the engine distributors authorised by the

 

 

 

Lincoln branch office)

 

 

iii) Intermotor Engines and Accessories

12 months

12 months

 

(warranty services can only be carried out

 

 

 

by an authorised Lincoln F.S.S. or other

 

 

 

agency approved by the Lincoln branch

 

 

 

office)

 

 

iv) Briggs & Stratton Vanguard Engines

*24 months

*24 months

 

and Accessories

•The Magnetron ignition

 

(warranty service can only be carried

system is warranted by

 

out by an authorised Briggs & Stratton

Briggs & Stratton for 5 years.

 

service dealer).

 

 

Exclusions

Subject to the express and statutory warranties hereinbefore provided Lincoln provides no other warranties in respect of the manufacture or sale of goods and in particular Lincoln shall have no responsibility or liability in respect of:

a)Repairs done to Lincoln’s goods and undertaken by the purchaser outside Lincoln’s premises without written authority from Lincoln obtained prior to any such repair;

b)Any damage or failure of the goods as a result of normal wear and tear or the neglect misuse abuse or failure to properly service goods by any purchaser.

The liability of Lincoln is limited as hereinbefore provided and Lincoln shall not be liable for any incidental special or consequential damage suffered by a purchaser whether or not arising out of circumstances known or foreseeably known by Lincoln and in particular arising out of the supply of goods to a purchaser or the use of goods by a purchaser whether based on breach of contract negligence or tort.

Lincoln supplies certain batteries in connection with its supply of goods and the purchaser acknowledges that any such battery is warranted by its manufacturer and any claim in respect of such a battery whether as to a defect in the battery or as to damage consequential upon a defect in a battery shall be made by the purchaser to the manufacturer of the battery and the purchaser shall not hold Lincoln in any way liable for the operation non-operation or malfunction of any such battery.

Spare Parts Policy

As a manufacturer Lincoln undertakes to support its product with supply of spare parts. Lincoln policy in the case of light to medium duty welding equipment is to provide full parts support for the period of 10 years from last manufacture. In the case of heavy duty industrial and fully automatic equipment, Lincoln undertakes to provide full parts support for a period of 15 years from last manufacture date of any model.

Lincoln recognises that it is totally bound by the policy of its suppliers with regard to purchase items, however, the above policy will apply to purchase items and components and Lincoln practice is to take into its stock appropriate levels of inventory at the time it ceases to buy for current manufacturing to ensure its overall policy is followed. Where possible, due to common usage or availability, Lincoln will continue to supply beyond the above periods, however, Lincoln will not undertake special manufacture outside these guidelines unless a customer is willing to accept the appropriate set up charge where tooling has been retained, and the delivery as dictated by manufacturing demand.

IN LINE WITH THE COMPANY'S POLICY OF CONTINUING PRODUCT IMPROVEMENT, SPECIFICATIONS HEREIN ARE SUBJECT TO MODIFICATION OR CHANGE WITHOUT NOTICE

The Lincoln Electric Company (Australia) Pty. Ltd. A.C.N. 000 040 308

35 Bryant Street, Padstow, Sydney 2211, Australia

Telephone:

(02) 9772-7222

Fax: (02) 9792-1387

International:

Ph: +61 2 9772-7222

Fax: +61 2 9792-1387

In Australia, Lincoln Technical Sales Representatives are located in Townsville, Mackay, Gladstone, Brisbane, Newcastle, Sydney, Wollongong, Melbourne, Tasmania, Adelaide and Perth. To contact your local Lincoln Technical Sales Representative, call 1300 728 720 (for the cost of a local call). Lincoln products are sold primarily through its distributors. Our

Regional Office locations are:

 

Northern Region: 240 Evans Road, Salisbury, Qld, 4107

(07) 3277-2955

Central Region: 35 Bryant Street, Padstow, NSW, 2211

(02) 9772-7222

Southern Region: 1-3

Grange Road, Cheltenham, Vic, 3192

(03) 9584-9299

Western Region: 25

Barker Street, Belmont, WA, 6104

(08) 9277-8744

New Zealand: 152 St Georges Road, Avondale (Auckland)

(9) 828-5180

Singapore: Blk 219,#02-01 Henderson Road, Singapore

276-0878

THE LINCOLN ELECTRIC CO.

Cleveland, Ohio, U.S.A. - Subsidiary companies established in Australia, Canada, Europe, North and South America.

Version 7/99 Reprint 100

Page 26
Image 26
Lincoln Electric CV320-I operating instructions Warranty, Telephone Fax 02 International Ph +61 2 Fax +61 2

CV320-I specifications

The Lincoln Electric CV320-I is a versatile and robust constant voltage power source designed primarily for semi-automatic and automatic welding applications. This machine is widely appreciated for its reliability, efficiency, and cutting-edge technologies, making it a preferred choice in various industrial settings.

One of the standout features of the CV320-I is its advanced inverter technology. This innovative design allows for a more lightweight and compact machine while maintaining high performance levels. The inverter technology improves energy efficiency, resulting in lower operational costs over time. Moreover, its compact size makes transportation and handling easier, especially in job site scenarios where space is at a premium.

Another significant characteristic of the CV320-I is its arc stability. Equipped with sophisticated control circuitry, the machine delivers a consistent arc throughout the welding process. This leads to improved weld quality, reduced spatter, and a cleaner finish. The machine also features a wide voltage range, accommodating various welding processes such as MIG and TIG welding, making it versatile for different applications.

The CV320-I offers impressive output ratings, providing the power needed for heavy-duty tasks. It delivers excellent performance with a duty cycle suitable for continuous use, allowing operators to work longer without interruptions. Additionally, it includes quick disconnects for easy setup and breakdown, enhancing productivity.

Another crucial aspect of the CV320-I is its user-friendly interface. The control panel is intuitively designed, featuring clearly labeled knobs and settings that allow even novice operators to adjust parameters with ease. This simplicity enhances efficiency on the shop floor, reducing downtime associated with complicated setups.

The machine also offers a range of safety features, such as thermal overload protection and output voltage sensing, to ensure both operator safety and equipment longevity. The durable construction and high-quality components further contribute to the machine's ruggedness and reliability in various industrial environments.

In summary, the Lincoln Electric CV320-I is an exceptional welding power source that combines innovative technology, user-friendly design, and robust performance. Its inverter technology, arc stability, and safety features make it an ideal choice for demanding welding applications, ensuring satisfactory results for professionals in the field.