Hitachi GR2000 Series manual At Value not in range 0 to Value Specified communities value

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Table 5-5 Routing Protocol Error Messages (continued)

export: invalid autonomous system value at	AS number is invalid. Specify a value within the range of 1 to 65534.
<Value> not in range 1 to 65534
	<Value>: Specified AS number
export: invalid {BGPBGP4+}	In export definition, the BGP/BGP4+ metric is invalid. Specify a value
{metriclocalpref} metric value at <Metric> not	within the range of 0 to 65535.
in range 0 to 65535
	<Metric>: Specified metric value
export: invalid domain-number value at	OSPF or OSPFv3 domain number value is out of valid range. Specify
<Domain Number> not in range 1 to 65535	value within the range of 1 to 65535.
	<Domain Number>: Specified domain number
export: invalid export-type value at <Value>	AS external-route type is invalid. Use 1 or 2.
not in range 1 to 2
	<Value>: Specified AS external type
export: invalid external-route-tag value at	AS external-route tag value is invalid. Specify a value within the
<Value> not in range 0 to 2147483647	range of 0 to 2147483647.
	<Value>: Specified As external tag value.
export: invalid high end of range value at	In the between specification, upper limit value of mask range is
<Value> not in range 0 to {32128}	invalid. Specify a value within the range of 0 to 32/128.between
	<Value>: Specified upper limit value of mask
export: invalid {InetIPv6} mask bits value at	At masklen/prefixlen, the mask length is invalid. Specify a value
<Value> not in range 0 to {32128}	within the range of 0 to 32/128.
	<Masklen>: Specified mask length
export: Invalid interface name ’<Interface	The multi-home interface is specified. Do not specify multi-home
Name>’	interface.
	<Interface Name>: Specified interface name
export: invalid low end of range value at	In the between specification, lower limit value of mask range is
<Value> not in range 0 to {32128}	invalid. Specify a value within the range of 0 to 32/128.
	<Value>: Specified lower limit value of mask
export: invalid number of communities value	Specified community count is over the limit. Specify a value up to 25.
at <Value> not in range 0 to 25
	<Value>: Specified communities value
export: invalid number of route-filter lists value	Specified route filter count is over the limit. Specify a value up to 8.
at <Value> not in range 1 to 8
	<Value>: Specified communities value
export: invalid octet value at <Value> not in	More than 255 values are defined in dot notation. Specify within the
range 0 to 255	range of 0 to 255.
	<Value>: Specified value
export: invalid { OSPF OSPF6 } metric offset	The range for specifying OSPFASE/OAPF6ASE metric offset values
value at <Metric> not in range 1 to 16777215	in export definition is invalid. Specify within the range of 1 to
	16777215.
	<Metric>: Specified metric offset value
export: invalid {OSPFOSPF6} metric value at	OSPFASE/OSPF6ASE metric in the configuration information is
<Metric> not in range 0 to 16777215	invalid. Specify a value within the range of 0 to 16777215.
	<Metric>: Specified metric value
export: invalid policy group number value at	Policy group number value is out of valid range. Specify value within
<Group Number> not in range 1 to 16	the range of 1 to 16.
	<Group Number>: Specified policy group number
export: invalid range end: <Value>	In Aspath_term{m,n}, m>n or n is more than 256. Reduce start value
	to more than end value or assign a value less than 255 to the end
	value.
	<Value>: Specified end value (n)
export: invalid range start: <Value>	In aspath_term{m,n}, {m}, {m,}, m is more than 256. Specify a value
	less than 255.
	<Value>: Specified start value (m)
export: invalid { RIP RIPng } metric offset	The range for specifying RIP/RIPng metric offset values in export
value at <Metric> not in range 1 to 15	definition is invalid. Specify within the range of 1 to 16777215.
	<Metric>: Specified metric offset value

5-32	GR2K-GA-0014
	Ver. 07-02