Hitachi GR2000 Series manual Flow detecting condition parameter, General protocol number

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Flow detecting condition parameter:

{ipDescription:<protocolNo.Specifies>tcptheudphigh-icmporderprotocoligmp}number of the protocol name.

		If all the protocols are taken as the object, ip is specified.
	Default:	No default is possible.
	Range of value: 0 to 255 (ten-decimals). (Please refer to Table 1-20.)
Table 1-38 General protocol number
Protocol No.		Protocol
	1	ICMP
	6	TCP
￿	8	EGP
	17	UDP

88IGRP

89OSPF

<ip_Specifiessource>the transmitter IP address.

If address to be designated is one:nnn.nnn.nnn.nnn

If address is designated by range:nnn.nnn.nnn.nnn-nnn.nnn.nnn.nnn

If designated by sub-net mask length:nnn.nnn.nnn.nnn/aa

If all IPv4 addresses are designated:any

Default: No default is possible.

Range of value: IP address (nnn, nnn, nnn, nnn): 0.0.0.0-255.255.255.255 Sub-net mask length (aa): 0-32

<ip_Specifiesdestination>the destination IP address.

If address to be specified is one:nnnn:nnnn:nnnn:nnnn:nnnn

If address is specified by range: nnn.nnn.nnn.nnn-nnn.nnn.nnn.nnn

If designated by sub-net mask length:nnn.nnn.nnn.nnn/aa

If all the IP addresses are specified:any

Default: No default is possible.

Range of value: IP address (nnnn:nnnn:nnnn:nnnn): 0:0:0:0:0:0:0:0-ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff

Sub-net mask length (aaa)0-32

[dscpThis<DSCPparameterValue>][Verenables.06the-01]function that rewrites a DSCP value. It rewrites the DSCP value that is the upper six bits of a TOS field. The lower two bits of a TOS field are not rewritten

27	26	25	24	23	22	21	20
		DSCP					CU
	High-Order 6 Bits are Designated
DSCP (Differentiated Services Code Point), CU (Current Unused)
1-66								GR2K-GA-0014

Ver. 07-02