Hitachi GR2000 Series manual PPP Information

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

4.7.8PPP Information

Input Format

[set]Parameters[{-pppdefault-pppsourceechoremiptexv6cptralsucctims<Cout>inteaddmuresspdsoffvaladdr<Byte>timn<Snegotiationes-sppp<Cconm]ipv6cp}]unt>od]{assign]off]f-p-ppcheckpipipxaddress}address]negotiation}]}]

The initial value items that can be set using PPP Information and the initial values during initial installation are shown in Table 4 8. For details of each parameter, refer to the configuration definition information in "PPP Information".

Table 4-8 List of Initial Values that Can Be Set Using PPP Information and Initial Values During Initial Installation

Information	Information Name		Initial Value
Group Name
PPP	Maximum data length that can be received using PPP		4500 bytes
information	protocol (Maximum value of MTU length in remote router)
	Number	Echo RQ frame retries using PPP protocol	7 times
	(Link quality monitoring function)
	Number	Echo Reply reception times for judging a	6 times
	high-quality link using PPP protocol (Link quality
	monitoring function)
	Echo-RQ transmission interval using PPP protocol (Link		3 seconds
	quality monitoring function)
	Report of local address to the remote router using PPP		Not reported.
	protocol
	Operation when the remote router reports IP address using		A correct IP address is
	PPP protocol by IP address negotiation		distributed as an IP
			address distribution
			request (assign).
	Report of local IPX node number to the remote router		Not reported.
	using PPP protocol
	Selection of IPV6CP used or not used by PPP protocol		Used.

4-42	GR2K-GA-0014
	Ver. 07-02