Hitachi GR2000 Series manual Deleting settings, 194

Available characters are maximum of 14 alphanumeric characters (first character must be alphabetic).

This parameter sets QoS IP frame condition list number. A maximum of 1024 lists can be registered.

(Define the QoS IP frame condition list before entering this command.)

Deletion by a unit of designated group.

1-1024

ThisListparameterNo.>sets QoS IP frame condition list number in the inserting position. Inserts one before the designated condition list.

Cannot be omitted. Set QoS IP frame condition group number registered in QoS IP frame condition group being inserted.

1-1024

GR2K-GA-0014 Ver. 07-02

All

displayed

Default:

Range of value:

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

1.2.6qos-ip-list-group(Information on QoS IP Frame Condition Group of the Old BSD UNIX-based Command System)

Establishes the QoS IP frame condition group settings. Combines QoS IP frame condition list which is defined in the QoS IP frame condition settings with the determination numbering. The maximum number of QoS IP frame condition groups that can be generated is 256 groups, and the maximum number of QoS IP frame condition lists which can be registered in a group is 1024.

Input Format

Setting information

Adding[set]qossettings-ip-list-group		<	>
Deleting settings			PListNo.
Displayingdeltesettings	[<IP-List-GroupName>]		>
Insertinginsertqosshowqossettings-ip-ip-list-list-group-groups<IP--			<Insert
ParametersNo.><IPListNo.>			PositionIPList

<IP-Description:List-GroupName>This parameter sets the name of the IP frame condition group

<IPDescription:ListNo.>

Default:

Range of value:

<InsertDescription:PositionIP

Default:

Range of value:

1-194