Hitachi GR2000 Series manual Logger-smtp, Log E-Mail t ansmission source inf rmation is displayed

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

2. Deletion of E-Mail transmission source information The setting of log E-Mail transmission source is deleted.:

3. Display of setting information

(config)#characters beyond 255 are ignored if 256 or more characters are set.

The log E-Mail t ansmission source inf rmation is displayed.:

Re ated Commands
h	sts
	ger-smtp
dns solver
		{	-fromnobody@router-1.mydomain.com;;
Pre autions
};	Only one l			E Mail t ansmission source information of this router can be
		emailogger --mail-from
	set.
		;
	The From: line is router name <nobody> when the log E-Mail transmission
	source information of this router is not set. The router name in this case is
	the name specified using a				outer c mmand.
	Characte s usable in e-mail addresses are limited to lower- and upper-case
	alphabet, numerals, hyph				(-), dot (.) and "at" sign (@). Note that
	underscoshowloggering cannot be used. In addit on, the "@" sign cannot be used at the
logger {				end of the add ess and no more than 1 can be used per address.
￿	b ginning
};		email-fromnobody@router-1.mydomain.com;
	The e-mail address length is limited to a maximum of 255 characters. All

4.2.4logger-smtp

Function

Sets SMTP server information for output log information by e-mail. Up to 16 entries can be set.

Input Format

To set information:

	To delete information:
4-12	[set]loggerg		smtp{<hostname><IPAdress>}ds[port<portnumber>]Ver. 07-02
	To show information:			dre
	deletelog
	show	er		GR2K-GA-0014