Configuration Error Messages

 

 

Table 5-5 Routing Protocol Error Messages (continued)

 

 

routerid: address invalid for routerid

The router ID is illegal. Specify a value other than 0.0.0.0/8,

 

127.0.0.0/8, and 240.0.0.0/24.

routerid: error resolving ’<Host Name>’:

The specified host name cannot be found. Specify the defined host

Unknown host

name.

 

 

 

<Host Name>: Specified host name

routerid: invalid octet value at <Value> not in

More than 255 values are defined in dot notation. Specify value

range 0 to 255

within the range of 0 to 255.

 

 

 

<Value>: Specified value

routerid: out of range

The parameter-specified range is exceeded in the input command

 

syntax. Numeric values of more than 4294967296 are contained.

 

Reconfirm a parameter.

routerid: routerid specified twice

routerid: routerid specified twice

routerid: syntax error

Syntax error

static: address should not be::

Default address is specified in the address. Specify addresses other

 

than the local host address.

static: address should not be v4-compat

The extended community is duplicated for definition. Do not duplicate

 

the extended community for definition.

static: address should not be v4-mapped

An IPv4-compatible address is specified in an address. Specify

 

addresses other than the IPv4-compatible address.

static: destination <IPv6 Prefix> and gateway

The address is defined in gateway address other than IPv6 prefix.

<Address> must belong to the same address

Specify IPv6 prefix.

family

 

<IPv6 Prefix>: Specified destination address

 

<Address>: Specified gateway address

static: duplicate gateway in list at <Address>

In the static definition, a gateway address is duplicated. Specify a

 

unique gateway address.

 

 

 

<Address>: Specified gateway address

static: duplicate preference <Value> static

Preference value static route is duplicated in a destination. Use a

route to <Address>

unique static route.

 

 

 

<Value>: specified preference value

 

<Address>: Specified static route address

static: error resolving ’<Host Name>’:

The specified host name cannot be found. Specify the defined host

Unknown host

name.

 

 

 

<Host Name>: Specified host name

static: gateway not a host address on an

Specified gateway is not the address of the host on the connected

attached network: <Address>

network. Specify a gateway address on the specified interface

 

address.

 

 

 

<Address>: Specified gateway address

static: gateway <IPv6 Prefix> is not global/

Specified gateway address is invalid. Specify global/site-local/

site-local/linklocal IPv6 address

linklocal address.

 

 

 

<IPv6 Prefix>Å FSpecified gateway address

static: Interface not found at ’<Interface

The specified interface name cannot be found. Specify the defined

Name>’

interface name.

 

 

 

<Interface Name>: specified interface name

static: Interface not found at <Address>

Interface of specified interface address is not found. Use a defined

 

interface address.

 

 

 

<Address>: Specified interface address

static: invalid inet mask bits value at

In the masklen specification, the mask length is invalid. Specify a

<Masklen> not in range 0 to {32128}

value within the range of 0 to 32/128.

 

 

 

<Masklen>: Specified mask length

static: Invalid interface name ’<Interface

The multi-home interface is specified. Do not specify multi-home

Name>’

interface.

 

 

 

<Interface Name>: specified interface name

 

 

GR2K-GA-0014

5-49

Ver. 07-02

 

Page 439
Image 439
Hitachi GR2000 Series manual Static address should not be v4-compat