Hitachi GR2000 Series manual Which a Cops agent function can be set to all RPs. It cannot

Models: GR2000 Series

1 500
Download 500 pages 15.25 Kb
Page 52
Image 52

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Parameters

 

 

[{-no -yes}]

 

 

Description:

Specifies use or no-use of the flow control function.

 

-no

: Not used.

 

-yes

: Used.mParameter

Default:

no

 

[{This-classifyparameterall_fixedlyoff-specifiesclassifytheallpriority}]:of an IPv4 packet that this router generates or specifies it using flow qos command. It is invalid in RP-A1. In RP-A1, this parameter operates as classify_all_off. The IPv6 packet that this router generates is controlled by the priority set using a flow qos command irrespective of the existence of this option.

This parameteroffspecifies: the fixed priority in the IP packet that this router generates. The priority for each packet type when this parameter is specified is

-classifyshown_inall:Table 1-8 on page 1-12.

This parameter specifies the priority, set using a flow qos command, in the IP packet that this router generates. The priority for each packet type when this parameter is specified is shown in Table 1-9 on page 1-13.

Default: -classify_all_off

Range of value: None

[-copsDescription:range<MinimumThisListparameterNo.>-<MaximumspecifiesListthe Norange.>[Verof a.flow06-03]list number in

 

which a COPS agent function can be set to all RPs. It cannot

 

be changed when "cops_yes" is set in the cops configuration

 

definition. Also, this parameter cannot be deleted when cops

 

configuration definition

set.

Default:

None (A COPS function

not used.)

Range of value:

1 to 20000 (decimal)

 

Note 1:

The calculation expression for obtaining RP unit yen and

 

numeric characters is described below.

 

Number RP unit entries = <Maximum List No.> - <Minimum

 

List No.> + 1

 

An example of calculation for the number of entries is given below.

For -cops range 1001 - 2000 2000 - 1001 + 1 = 1000

The number of flow list entries that can be set using a COPS agent function is 1000 in units of RP.

This parameter can set a maximum of 2000 entries per RP.

1-10

GR2K-GA-0014

 

Ver. 07-02

Page 52
Image 52
Hitachi GR2000 Series manual Which a Cops agent function can be set to all RPs. It cannot