Hitachi GR2000 Series manual Default Bytes, Default3 Range of value 0 to, GR2K-GA-0014 221 Ver

Filtering/QoS Information

marks (“). Alphanumeric characters and special characters can be entered. However, a character string can be entered without using double quotation marks (“) when no special character (e.g., space) is contained in an entry character string.

However, notice that the characters below cannot be used. “(double quotation mark), { (beginning of brace), } (end of brace), ‘ (single quotation mark), ; (semicolon), $ (dollar), and ’ (reverse single quotation mark). For more information, see Table 1-102

aveageDescription:packet_sizeThis<packetparametersize>]specifies the average packet size.

Default: 1024 (bytes)

[-retryRange of value: 24 to 65535 (bytes)

Description:time<retryThistime>]parameter specifies the number of retry times when the connection to the policy server fails. If reconnection to the policy server has failed as many times as the specified retry number, the policy information set to this device from the policy server is cleared.

Default:3

Range of value: 0 to 10

Examples

1.Setting parameters:

PEPID and the IP address of a primary server are set using a cops control function.

PEPID, the IP addr s of a primary server, the port number of a primary server, the IP address of a backup server, the ort number of a backup server, a server

copsyes{};(config)password,pepidTkyo;rimary10#copsshwcopand a-.COPSyes0.111-pepid.password5;Tokyo1are-setprimary10using a cops.10.11control.5function.

GR2K-GA-0014	1-221
Ver. 07-02