Hitachi GR2000 Series manual Setfilter- groupFilter-Group-NameFilterListNo

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

7.Display of blank entry number Display of all blank entry numbers

Related Configuration Object

filt r

(config)#Freenumber:￿Displayshow5f5,7,15firstffilterblank-1024-list-listenfreeryfreenumbermin_no

filt r-group filt r- nterface q s-tos-map dlci group vc-gro p

p licy-group

Pre autions

1. A maximum of 1024 filter list conditio s can be created with each device.

2. Filter list being used by fil er group ca not be deleted.

3. If th s command is inputted in the cases where changes are made on the IP ut ng protocol nformation, the IP multicast protocol information, and the MPLS information, and the apply command is not being executed, the apply

subcommand is executed before the command is executed, and the changed IP routing protocol information, IP multicast routing protocol information, and MPLS information are reflected to the operation.

1.1.12filter-group (Information on Filter Group of Old BSD UNIX-Based Command System)

Function

Object for creation, modification, deletion, and display of the filter group information. Register in the order of judging the filter conditions defined by the filter list. A maximum of 256 filter groups can be created, and the total filter conditions of all groups must be 1024 or less.

	Input Format
	To create the filter group information:
1-124	[set]filter-group<Filter-Group-Name><FilterListNo.>		Ver. 07-02
	To modify the filter	information:

GR2K-GA-0014