GR2K-GA-0014 Ver. 07-02
1-70
If 0 to 4 is specified in the case of RP-C,RP-D,RP-C6,RP-D6,RP-CV,RP-DV,GR2000-1B,GR2000-2B,GR2000-2B+ and GR2000-BH, the operation is performed by taking the contract band as 4.1[kbps].
<Byte>: 0 to 131072 (10-decimals)
If 0 to 11 is specified in the case of RP-A, the operation is performed by taking the contract band as 12[kbps].
<kbps>: 0 to 2400000 (0 to 2.4G) (10-decimals).
Range of value:
None. (No contract band surveillance is executed.)
Default:
When setting this parameter, it is not possible to set -max_rate,-max_burst, and min_rate_rate, -min_rate_burst.(-upc_burst is effective only in RP-C,RP-D,RP-D6,RP-CV,RP-DV,GR2000-1B,GR2000-2B,GR2000-2B+ and GR2000-BH.)
Range of value:
None
None (No default is possible when designating the operation.)
Default:
￿[-action]If the operation parameter is either set or changed, please be sure to set this parameter at the head of the whole operation parameter.
[-upcSpecifies<kbps>the[-upccontractburstband<Byte>]]by kbit/s. Specifies burst size in byte unit. If a value greater than the line speed is set, no action at breach is taken.
Operation parameter
Range of value:
None. (The important packet protecting function is not used.) [<ICMPv6_Code>]
Default:
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Ordinary packet flow detecting condition} [premium {important packet flow detecting condition}]
When the maximum band restriction (-max_rate) or the minimum band assurance (-min_rate) is executed, the important packet is transferred with priority given in the band, and the ordinary packet is transferred when the important packet is not transferred by using all the bands. This function is called the important packet assuring function.
The flow detecting conditions for the ordinary packet are inputted before the premium, and the flow detecting conditions for the important packet after the premium. The flow detecting conditions for the important packet can be set only after either one of the maximum band restriction
(-max_rate) or the minimum band assurance (-min_rate) has been set.
The parameters that have not been set in the important packet flow detecting conditions are subjected to the same conditions as the parameters that have been set in the ordinary packet flow detecting conditions. For setting the important packet flow detecting conditions, set only the flow detecting condition parameters whose detecting conditions differ from the ordinary packet flow detecting conditions.
When the important packet protecting function is used, the number of entries used per list becomes two or four entries. (*1)
(This parameter is effective only for RP-C and RP-D.)
Page 112
Image 112
Hitachi GR2000 Series manual