Hitachi GR2000 Series manual Indication of top blank list number in the specified range

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Indication of top blank list number in the specified range

Parametersfreeminshowflownofilter<InterfaceName>{inout}[list<ListNo.>-<ListNo.>]

Parameters that can be set for each RP type have been determined. The list of parameters that can be set for each RP type using IPv6 filter flow information is shown in Table 1-29 List of Parameters that Can Be Set for Each RP Type Using IPv6 Filter Flow Information.

Table 1-29 List of Parameters that Can Be Set for Each RP Type Using IPv6 Filter Flow

	Information
			RP-A1		RP-C6, RP-D6
	Item				GR2000-1B,
			RP-C, RP-D
		Parameter			GR2000-2B
Main Item	Sub-Item		Input	Output	Input	Output
			Side	Side	Side	Side
Flow detection	All protocol IPs	ip	x	x	√	√
conditions
	Protocol number	<protocol No.>	x	x	√	√
	Protocol TCP	tcp	x	x	√	√
	Protocol UDP	udp	x	x	√	√
	Protocol ICMP	icmp6	x	x	√	√
	Source IP address	<IP_Source>	x	x	√	√
	Destination IP address	<IP_Destination>	x	x	√	√
	DSCP	dscp <DSCP_Value>	x	x	√	√
	precedence	precedence	--	--	√	√
		<precedence_Value>
	IP user data length	{upper lower} <Length>	x	x	√	√
	Source port number	<Port_Source>	x	x	√	√
	Destination port number	<Port_Destination>	x	x	√	√
	ack flag	ack	x	x	√	√
	syn flag	syn	x	x	√	√
	ICMP6 type	<ICMPv6_Type>	x	x	√	√
	ICMP6 code	<ICMPv6_Code>	x	x	√	√
Designation of	Relay	forward	x	x	√	√
operation
	Discard	drop	x	x	√	√
	Policy routing	policy <Interface Name>	−	−	√	−
		<IP Address>
	DSCP	replace_DSCP	−	−	√	√(∗1)
		<DSCP_Value>
	Connection branch	index <No.>	−	−	−	√
	Extended header	scan_extension	−	−	√	√
	additional function
√ : Can be set.

-:Cannot be set.

x:Can be set when RP-C6, RP-D6, RP-CV, and RP-DV are not installed in this router. *1: Cannot be set for multi-cast.

1-44	GR2K-GA-0014
	Ver. 07-02