Hitachi GR2000 Series manual Nif

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Table 5-3 Network Interface Error Messages (continued)

Dch line not specified.	Dch line not specified. When own telephone number is undefined on
	Priisdn line, set Dch line.
Dlci not specified.	A DLCI value has not been specified. Specify a DLCI value.
Duplicate dlci.	The same DLCI values are used in the line. Make each DLCI value in
	the line unique.
Duplicate IP address.	The same IP address is set. The combination of a local address and
	a remote address is set in another entry.
Duplicate subline number.	The same subline number is used. Make each timeslot number in the
	same line unique.
Duplicate timeslot.	The same timeslot number is used. Make each timeslot number in
	the same line unique.
Duplicate vc.	The same VCI in VP is set. Set the unique value to all of the VCI in
	VP.
Duplicate vpi.	The same VPI in ATM is set. Set the unique value to all of the VPI in
	ATM.
Echo success times is greater than echo trial	The reference for Link Quality OK exceeds the number of link quality
times.	tests. Set the reference for Link Quality OK below the number of link
	quality tests.
Invalid backup interface name.	Invalid backup interface name. Specify the different interface name
	to backup source and backup destination. Or, specify the interface
	not specified by other entry to backup destination interface name.
Invalid bod.	Invalid bod. When Isdn Ppp is grouped with Ppp, set the same Bod
	with other entry within the group to Ppp.
Invalid bod.	Invalid bod. When Isdn Ppp is grouped, set the same Bod with other
	entry within the group to Ppp.
Invalid dch line.	Invalid dch line. Set the line without Dch line in line group.
Invalid interface name.	Invalid interface name. Specify the interface not specified by other
	entry to backup destination interface name.
Invalid line number.	Specified line number not present in NIF. Specify a line number for
	NIF.
Invalid line type.	Invalid line type. Different line types are set within the same NIF.
Invalid local IP address.	Local IP address value invalid. Enter a correct local IP address.
Invalid name <name>.	Can not specify entered name of configuration information.
	For subline: Set line name whose line type is ce3
	For Timeslot: Specify either line name whose line type is bri, pri, j2,
	t1, e1, or subline name.
	For PPP: Specify either line name whose line type is serial, oc3pos,
	oc12pos, oc48pos, t3, e3, or name of timeslot.
	For Frame Relay: Specify either line name whose line type is serial
	or name of timeslot.
	For DLCI: Specify name set in frame relay.
	For DLCI group: Specify name set in DLCI.
	For Line Group: Line type is ISDN POOL on briisdn and Priisdn.
	Specify a line on the same RP that is not set on the ISDN PPP.
	For ISDN POOL: Line type is ISDN POOL on briisdn and Priisdn.
	Specify a line on the same RP that is not set on the ISDN PPP or the
	name of a Line Group on the same RP.
	For ISDN PPP: Line type is ISDN POOL on briisdn and Priisdn.
	Specify a line on the same RP that is not set on the ISDN POOL or
	the name of an ISDN POOL on the same RP.
	For ATM, VP, VC: Specify the line name whose line type is oc3atm,
	oc12atm, 25atm.
	For VC group: Specify VC on the same line. Specify vc on the same
	line.
	For group: Specify DLCI, VC, PPP, ISDN PPP name on the RP
	already defined.

5-8	GR2K-GA-0014
	Ver. 07-02