Hitachi GR2000 Series manual Snmp Information, Mthe Traprtransmission mode is selectiontrap

SNMP Information

teThisperatuparameteretraptransmits the trap in case the temperature state changes when

-mthe Traprtransmission mode is selection_trap.

atThispvcparameterap transmits the trap in case a PVC failure is notified when the trap transmission mode is selection_trap.

Examples

1.Create the following SNMP Manager entries, and show the resulting SNMP Manager information:

SNMP Manager with IP address 10.1.1.1, community name “public,” and read-only MIB access

SNMP Manager with IP address 20.1.1.1, community name “public,” and read/write MIB access

SNMP managers that permit MIB access in the read/write mode in community name "event-monitor" and IP address 30.1.1.1 and send "bgpEstablished," "bgpBackwardTransition," "risingAlarm" and "fallingAlarm" traps

SNMP managers that permit MIB access in the read mode in community name "private" and IP address 40.1.1.1, limit opportunities for the issuance

￿of the cold start trap and send version 2 of the standard trap

SNMP managers that permit MIB access in the read/write mode in community name "public-v6" and IP address 3ffe::.

Ver. 07-02

GR2K-GA-0014-(config)#snm{};(config)#bgptraptrapversion"p};public};event-rivate"ublicnmphowsnmpon2-monitor"-publicevent30};v6"40{apivate"201.{3ffe::.11.{.-11monitor"-..v6"11102.{bgprmon401readread.1.3ffe::.1trap;1..1write130.write;write;1-.read1-.-limited1readselection.1write-redtraitecoldstartp_wr-traplimited{-_selectiontrapcoldstartrap_tversionraptrap2;3-5