Hitachi GR2000 Series manual Address Translation Information

Configuration Error Messages

5.18Address Translation Information

Table 5-18 Address Translaion Information Error Messages

Message	Contents
nat:timeout is not in range 300 to 86400	The timeout value entered exceeds the prescribed range.
	Set it within the range of 300 - 86400.
nat:network mask length of NAT source IP	The post-conversion IP address mask length entered exceeds the
address is not in range 8 to 32.	prescribed range.
	Set it within the range of 8 - 32.
at:network mask length of NAT translation IP	The post-conversion IP address mask length entered exceeds the
address is not in range 8 to 30 or 32.	prescribed range.
	Set it within the range of 8 - 30 or 32.
nat:port is not in range 1 to 65535.	The port value entered exceeds the prescribed range.
	Set it within the range of 1 - 65535.
nat:port_range is not in range 1 to 65535.	The port_range value entered exceeds the prescribed range.
	Set it within the range of 1 - 65535.
nat:Invalid NAT source IP address.	The pre-translation IP address value entered is invalid.
	Set the IP address correctly.
nat:Invalid NAT translation IP address.	The post-translation IP address value entered is invalid.
	Set the IP address correctly.
nat:Invalid network mask length of NAT	The pre-translation IP address mask length entered is invalid.
source IP address.	Set mask length correctly.
nat:Invalid network mask length of NAT	The post-translation IP address mask length entered is invalid.
translation IP address.	Set mask length correctly.
nat:Invalid protocol.	The protocol value entered is invalid.
	Set protocol correctly.
nat:Invalid port.	The port value entered is invalid.
	Set port correctly.
nat:Invalid port_range.	The port_range value entered is invalid.
	Set port_range correctly.
nat:Invalid service.	The service value entered is invalid.
	Set service correctly.
nat:incorrect port_range parameters	The port number set behind the port_range range designation is
	smaller than the port number specified in front.
	Set port_range correctly.
nat:Maximum number of outside_interface are	Entries exceeding the maximum entry count of outside_interface are
already defined.	being added.
	Delete unnecessary entries before adding new entries.
nat:Maximum number of NAT rule are already	Inbound NAT entries or outbound NAT entries exceeding the
defined.	maximum entry count are being added to NAT rules.
	Delete unnecessary entries before adding new entries.
nat:illegal option -- protocol	"protocol" is an invalid option with the specified NAT type.
	Set the correct NAT type.
nat:illegal option -- port	"port" is an invalid option with the specified NAT type.
	Set the correct NAT type.
nat:illegal option -- port_range	"port_range" is an invalid option with the specified NAT type.
	Set the correct NAT type.
nat:illegal option -- service	"service" is an invalid option with the specified NAT type.
	Set the correct NAT type.
nat:No such name <name>.	The specified interface name does not exist.
	Set the correct interface name.
nat:Invalid name <name>.	The specified interface name is not valid as a NAT interface.
	Set the correct interface name.
nat:option requires an argument -- port	"Port" is an essential option with the specified NAT type.
	Set the "port" option.
GR2K-GA-0014	5-97
Ver. 07-02