Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

information. Designate this parameter’s out (Outbound) as the flow control of the output side. When this parameter is designated, only "-priority" and "-discard" can be set. The setting range for "-priority" is from one to four. This parameter cannot be set if the output line is a VLAN line.

Default

None

Range of value

The group number designated by the qos-interface (QoS

 

interface information).

[-replaceThis parameterdscp<DSCPenablesValue>]the function that rewrites a DSCP value and that determines the output priority and queuing priority using the rewritten DSCP value. The DSCP value and its corresponding output priority and queuing priority are specified using a qos-tos-mapcommand. This parameter rewrites the DSCP value that is the upper six bits of a TOS field. The lower two bits of a TOS field are not rewritten. On the output side, do not specify this parameter to multicast packets.

27

26

25

24

23

22

21

20

 

 

 

 

DSCP

 

 

 

CU

 

 

 

High-order 6 bits are designated.

 

 

 

 

DSCP (Differentiated Services Code Point), CU (Current Unused)

Default:

 

-priority: 4

 

 

 

 

 

 

 

 

-discard: 4

 

 

 

 

 

 

 

 

(Flow control when output priority and queuing priority are

 

 

 

specified.)

 

 

 

 

 

Range of value: - replace_dscp<DSCP_Value>:0-255(decimal) (Note 1, 2)

[-dscpThismap]parameter enables the function that determines the output priority and queuing priority using the DSCP value of an input packet. The DSCP value and its corresponding output priority and queuing priority are specified using a qos-tos-mapcommand. The upper six bits of a TOS field in a receive packet are treated as a target. The lower two bits of a TOP field are ignored. -priority, -discard, and -replace_dscp cannot be set when this parameter is set.

27

26

25

24

23

22

21

20

 

 

 

 

DSCP

 

 

 

CU

 

 

 

High-order 6 bits are designated.

 

 

 

 

DSCP (Differentiated Services Code Point), CU (Current Unused)

Default:

 

-priority: 4

 

 

 

 

 

 

 

 

-discard: 4

 

 

 

 

 

 

 

 

(Flow control when output priority and queuing priority are

 

 

 

specified.)

 

 

 

 

 

 

Specifies the operation when the contract band is breached.

 

1-96

[{-penaltydrop-penaltydiscardd<No.>-penaltydscp<DSCP_Value>}]Ver.07-02

 

-

_iscardrop:Packet<No.>:

.

GR2K-GA-0014

 

 

 

 

Page 138
Image 138
Hitachi GR2000 Series manual Penaltydrop-penaltydiscarddNo.-penaltydscpDSCPValueVer.07-02