Hitachi GR2000 Series Maxqueue Maximum queue count is Maximum queue count is 64*1, ROUTE-OS6B

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Default:24

Range of value: 1-32

(Queue cannot to be created to interface depends on the specified value. 1-8 is for queue count 8, 9-16, for 16, and 17-32 for 32. Bandwidth is allocated equally to the specified value within the created queue.)

-[{max-maxDescription:queueuenumbernumber1000}]32Specifies4-max-maxqueuethe maximumnumber64queue8-maxcountqueueto benumbercreated25016tointerface. Invalid when queue mode is priority, -round_robin, -bandwidth, -equal_bandwidth.

-max_queue_	_4: The maximum queue count is 4.
-max_queue_	_8: The maximum queue count is 8.
-max_queue_	_16: The maximum queue count is 16.
-max_queue_	_32: The maximum queue count is 32.
-max_queue_	_64: The maximum queue count is 64(*1)
[ROUTE-OS6B].
-max_queue_	_250: The maximum queue count is 250.
-max_queue_	_1000: The maximum queue count is
.

The maximum queue number can be 64 only when set to one line (line number zero).

(*1):The relationship between the "-max" queue number 64 and the set line in GR2000-1B and GR2000-2B is explained below:

1.64 is effective as the maximum queue number only when set to one line (line number zero.

2.If the "-max" queue number 64 is defined in relation to the line number zero under a condition where multiple line information definitions are set in the same NIF in GR2000-1B and GR2000-2B, this definition is null and void.

3.If the "-max" queue number 64 is defined in the line number zero in GR2000-1B and GR2000-2B, and the "-max" queue number 64 is deleted under a condition where multiple line information definitions are present in the same NIF, use the maintenance free command for other lines.

[-queueDescription:<QueueNo.>,Specifies<QueueNothe.>minimum-<QueueNobandwidth.>,...<minper ratequeue(kbps)>]. When only

queue No. is specified and the minimum bandwidth is not specified, 0 [kbit/s] is set to minimum bandwidth. The minimum band is set only when the queue mode is bandwidth_kbps. The minimum band is invalid even if it is set when the queue mode is priority, round_robin, bandwidth, or bandwidth_traffic.

To specify the minimum bandwidth of one queue: -queue 5 (Specifies queue No. 5.)

To specify the minimum bandwidth of plural queues: -queue 5, 10, and 12 (Specifies queue No. 5, 10, and 12.

To specify the minimum bandwidth of	range of queue:
-queue 21 to 30 (Specifies queue No. 21 to 30.
1-144	GR2K-GA-0014
	Ver. 07-02