Hitachi GR2000 Series manual Designation of queuing priority class for bridge

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Table 4-18 List of Initial Values That Can Be Set Using QoS Information and Initial Values During Initial Installation

Information	Information Name	Initial Value
Group Name
QoS	Queue mode of queue list	Output priority control
information
	Number of queues in which the band is equally	24
	assigned when the queue mode of a queue list
	is a minimum equal band guarantee
	Maximum number of queues when the queue	8
	mode of a queue list is a minimum band
	guarantee (specified in kbit/s)
	Minimum band when the queue mode of a	0
	queue list is a minimum band guarantee
	(specified in kbit/s)
	Discard mode	Discard mode 3
	Check of source and destination IP addresses	The source and destination IP
		addresses are checked for
		replacement without replacement.
	Check of source and destination upper protocol	The source and destination upper
	port numbers	protocol port numbers are checked
		for replacement without
		replacement.
	Sequential check of IP address and upper	The source and destination IP
	protocol port number	addresses, and source and
		destination upper protocol port
		numbers are simultaneously
		checked without replacement,
		respectively.
	Designation of maximum output priority class	8
	Designation of output priority class (for IP)	Class 4
	Designation of queuing priority class (for IP)	Class 4
	Designation of output priority class (for IPX)	Class 4
	Designation of queuing priority class (for IPX)	Class 4
	Designation of output priority class (for bridge)	Class 4
	Designation of queuing priority class (for bridge)	Class 4
	Designation of output priority class (for hdlc)	Class 4
	Designation of queuing priority class (for hdlc)	Class 4

4-58	GR2K-GA-0014
	Ver. 07-02