Hitachi GR2000 Series manual Characters or hexadecimal 32 digits

	Configuration Error Messages
Table 5-5 Routing Protocol Error Messages (continued)
options: invalid maximum paths value at	The specified maximum path count in options definition is invalid.
<Value> not in range 1 to 16	Specify in the range of 1 to 16.
	<Value>: Specified maximum path count
options: invalid octet value at <Value> not in	More than 255 values are defined in dot notation. Specify value
range 0 to 255	within the range of 0 to 255.
	<Value>: Specified value
options: out of range	The parameter-specified range is exceeded in the input command
	syntax. Numeric values of more than 4294967296 are contained.
	Reconfirm a parameter.
options: syntax error	Syntax error
ospf: 2 or more areas have been defined:	Although two or more OSPF areas have been defined, a backbone
need to configure backbone	area has not been defined. Define a backbone area.
ospf: authentication-key "<Key>" <Length>	Specified authentication key is longer than 8 characters (for simple)
longer than [ 8 16 ] characters	or16 characters (for md5). For simple, the length is up to 8
	characters (or hexadecimal 16 digits). For md5, the length is up to 16
	characters (or hexadecimal 32 digits).
	<Key>: Specified authentication key
	<Length>: Specified authentication key length
ospf: authentication-key longer than [ 8 16 ]	Specified authentication key is longer than 8 characters (for simple)
characters	or 16 characters (for md5). For simple, the length is up to 8
	characters (or hexadecimal 16 digits). For md5, the length is up to 16
	characters (or hexadecimal 32 digits).
ospf: day must be between 1 and 31	Specified date is invalid. Specify a value within the range of 1 to 31.
ospf: domain <Domain Number> duplicated	OSPF domain number is duplicated. Do not define in duplication.
	<Domain Number>: Specified domain number
ospf: duplicate area	OSPF area ID is duplicated. Use a unique area ID.
ospf: duplicate entry at <Address> mask	Network range is duplicated in the ospf definition. Use a unique
<Mask> [exact refine]	network range.
	<Address>: Specified address
	<Mask>: Specified mask
ospf: duplicate interface address in list at	Interface address is duplicated in the ospf definition. Use a unique
<Address>	interface address.
	<Address>: Specified interface address
ospf: duplicate ospf clause	OSPF definition is duplicated.
	Delete one of the two
ospf: duplicate ospf interface parameter -	Interface parameter “cost” is duplicated in OSPF definition. Do not
“cost”	duplicate an interface cost.
ospf: duplicate ospf interface parameter -	Interface type is duplicated in OSPF area definition. Do not duplicate
"nonbroadcast"	interface type.
ospf: duplicate virtual link	In the virtual link definition of ospf, the group of a passage area and
	adjacent router ID has been already defined. Specify the group of an
	identical passage area and adjacent router ID so that they are not
	duplicated.
ospf: error in common options -- possible	In the OSPF area definition, an interface option is duplicated. Do not
duplicate or conflicting option?	duplicate an interface option.
ospf: error resolving ’<Host Name>’: Unknown	The specified host name cannot be found. Specify the defined host
host	name.
	<Host Name>: Specified host name
ospf: gateway not a host address on an	Specified gateway is not address of host on connected network.
attached network: <Address>	Specify a gateway address on specified interface address.
	<Address>: Specified gateway address
ospf: hour must be between 0 and 23	Specified time (hour) is invalid. Specify a value within the range of 0
	to 23.
GR2K-GA-0014	5-39
Ver. 07-02