Hitachi GR2000 Series manual Default Configuration Objects, Config# Direction

Operation Management Information

4.7Default Configuration Objects

4.7.1default

Function

Sets the configuration to the user-defined default values with the set subcommand, or displays the default values for the configuration with the show subcommand.

Input Format

To display the default values for the configuration information:

Parametershowdefault

Following displays a list of items and the parameters supported, which can be set to be used as it’s initial default values.

Example

Customize the default settings for SNMP and frame relay PVC status notification and display the results:

		snmp		snmp_read
				fult-framerelay_poll_directiondte
	(config)#
				direction
Related Configur tion Object
None
Pre autions
1.	You		nnot	irec ly customize the default se	ngs of a configuration in use. In
	order to customizeshowdefaultthe fau t settings of the c				figuration, create a new
			guration fi e using the copy subcommand, edit the new configuration, and
	replace the configuration wi h the edited file using he					subcommand again.
2.	If th					copy
			command is inputt d n the cases where changes are made on the IP
	r ut ng p otocol information, the IP multicast protocol information, and the
	MPLS info m tion, and the apply c mmand is not being executed, the apply
	subcommand is executed before the command is executed, and the changed IP
	default{r ut ng p otocol information, IP multicast routing protocol information, and
	};MPLSrameinforead;mlationypollare reflec ed todte;he operation.
GR2K-GA-0014							4-33
Ver. 07-02