Hitachi GR2000 Series manual Default4 Range of value, Mod fying parameters

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Parameters

Description:<Timeslot{<LineName>Name><DLCIThis<PeerparameterName>Name>}<VCsetsName>the relevant<GroupinterfaceName>nameestablished in

the bridge interface settings. (Before entering this command, establish the bridge interface settings.)

Default: Cannot be omitted.

-priority_class <No.

Description: This parameter sets the output priority class. In the case of output priority control, used as the output priority class. In the case of bandwidth and round-robin, used as the queue number.

Default:4

Range of value: 1-8

-discardDescription:class<No.>This parameter sets the queuing priority class.

Default:4

Range of value: 1-4

Examples

1. Setting parameters:

To set the output priority class 3 and queuing priority class 1 in the interface named office1:

		(config)#shw-showqosqos-bridge-bridgeoffice1priority-discrd_3clas2_	21;	Ver. 07-02
	2. Mod fying parameters:
		-discardToqoshangebridgeclasbridgeqosthe-bridge-queuingoffice1yes-intraceoffice1office1-classpriorityclassof-sptthe3cladiscardinterface3classnamed1office1;		from 1 to 2:
1-208				GR2K-GA-0014