Hitachi GR2000 Series manual Disable -t3scrambleoff

Operation Management Information

Table 4-4 List of Initial Value Items that Can Be Set Using line Information (WAN) and Initial Values During Initial Installation

Information	Information Name	Initial Value
Group Name
line Information	Selection of physical layer frame format in	CRC-4 Multiframe (crc4)
(WAN)	E1
	Selection of physical layer line code	HDB3(High Density Bipolar 3)(hdb3)
	format in E1
	Selection of synchronized clock in E1	Synchronized with the received clock. (external)
	Setting value of national bit in E1	0 (hexadecimal)
		(27: SI, 26: Unused, 25: Unused, 24: SA-4,
		23: SA-5, 22: SA-6, 21: SA-7, 20: SA-8)
	Selection of timeslot line rate in E1	64 kbps (64)
	Selection of synchronized clocks in T3	Synchronized with the clock in a local router.
		(independent)
	CRC length in T3	16 (bits)
	Selection of scramble disable/enable in T3	Disable (-t3_scramble_off)
	Selection of installation position in T3	CI(Customer Installation) (ci)
	network
	Selection of acceptance during remote	The remote loop-back test request can be accepted.
	loop-back test request in T3	The loop-back type specifies payload loop-back.
		(payload)
	Selection of MDL message in T3	MDL stops. (disable)
	Selection of physical layer frame format in	ESF(Extended Superframe) (esf)
	T1
	Selection of physical layer line code	B8ZS (Bipolar with 8 Zeros Substitutions) (b8zs)
	format in T1
	Selection of synchronized clock in T1	Synchronized with the received clock. (external)
	Selection of timeslot line rate I T1	64 kbps (64)
	Selection of installation position in T1	CI(Customer Installation) (ci)
	network
	Selection of FDL type in T1	AVSI T1.403(ansi)
	Selection of acceptance during remote	The remote loop-back test request can be accepted.
	loop-back test request in T1	(auto)
	Selection of PRM transmission/response	The PRM transmission/response is enabled. (enable)
	in T1
	Selection of synchronized clock in E3	Synchronized with the received clock. (external)
	Setting value of national bit in E3	0 (Na = 0)
	CRC length in E3	16 (bits)
	Selection of scramble disable/enable in E3	Disable (-e3_scramble_off)
line Information	Selection of synchronized multi-clock in	Synchronized with the received clock. (external)
(WAN)	E3
(continued)
	Setting value of national multi-bit in E3	0 (Na = 0)
	Multi-CRC length in E3	16 (bits)
	Selection of physical layer multi-frame	C-bit parity frame (cbit)
	format in E3
	Selection of synchronized multi-clock in T3	Synchronized with the clock in a local router.
		(independent)
	Multi-CRC length in T3	16 (bits)

GR2K-GA-0014	4-37
Ver. 07-02