Hitachi GR2000 Series manual Invalid phone number

	Configuration Error Messages
Table 5-3 Network Interface Error Messages (continued)
Invalid phone number.	Invalid phone number. Set own telephone number in the line that set
	own telephone number to the same.
Invalid physical interface type.	The interface type of the backup server is illegal. The Ethernet or
	frame relay may not be designated.
Invalid remote IP address.	The remote IP address is illegal. If the local IP address is IPV4, set
	the remote IP address to IPV4. Or, if the local IP address is IPV6, set
	the remote IP address to IPV6.
Invalid remote IP address.	The remote IP address is illegal. Set the correct remote IP address.
	Or use different IP addresses for the local and remote servers.
	Or, the IPV6 local address and the IPV6 remote address are not in
	the same scope.
Invalid timeslot number.	In the J2 timeslot:
	Although channel width is 24 or less, it exceeds the range of 96
	timeslots and quartered 24 timeslots.
	--> Although the channel width exceeds 24, it is not 1, 25, or 49.
	Specify the value so the timeslot number and timeslot specified in
	channel width are within the 24 timeslots defined by quartering 96
	timeslots.
	--> Specify 1, 25, or 49 in the timeslot number.
Invalid traffic.	Traffic invalid. Set a correct traffic.
IP address configuration not specified.	IP address configuration not specified. Set IP address.
IP configuration not specified.	IP routing has not been specified. Specify IP routing.
Line already defined.	A line is already defined. Define the line in another line number.
LINE No. out of range.	Specified line number exceeds maximum value. Check the line
	number.
Links not specified.	Links not specified. Set overload link count.
Max packet size is greater than max packet	Field maximum value is greater than the Frame Relay field maximum
size (Frame Relay).	value. Specify the value so the field maximum value is no greater
	than the Frame Relay maximum value.
Max packet size is less than dlci max packet	Field maximum value is less than some DLCI field maximum values.
size(dlci).	Correct DLCI field maximum values so they are more than all DLCI
	field maximum values of this line.
Maximum number of DLCI configurations are	No more DLCI configurations can be defined. Check the network
already defined.	configuration.
Maximum number of ethernet line are already	No more Ethernet lines can be added. Check the network
defined.	configuration.
Maximum number of Frame Relay	No more Frame Relay configurations can be set. Check the network
configurations are already defined.	configurations.
Maximum number of isdn_ppp configurations	No more isdn_ppp configurations can be set. Check the network
are already defined.	configuration.
Maximum number of NIF are already defined.	No line settings are possible. Recheck the number of lines per RP.
Maximum number of PPP configurations are	No more PPP configurations can be set. Check the network
already defined.	configurations.
Maximum number of pppoe configurations are	No more PPPoE configurations can be set. Check the network
already defined.	configurations.
Maximum number of traffic are already	256 types of traffic per line are already set. Check the network
defined.	configuration.
Maximum number of traffic ubr are already	Maximum number of traffic ubr are already defined. Check the
defined.	network configuration.
Maximum number of TUNNEL configurations	No more TUNNEL configurations can be set. Check the network
are already defined.	configurations.
Maximum number of vc are already defined.	2048 vc per line are already defined. Check the network
	configuration.
Maximum number of vc configurations are	Maximum number of vc configurations are already defined.
already defined.	Check the network configuration.
GR2K-GA-0014	5-9
Ver. 07-02