Hitachi GR2000 Series manual Subline Information WAN, Operation Management Information

Operation Management Information

4.7.7Subline Information (WAN)

Input Format

Parameters[set]-sublinedefaulttlel_timeslotframenationalbiformat{speed{56g704crc4esfsf<Pattern>64}]nocrc4}]]]

The initial value items that can be set using subline Information (WAN) and the initial values during initial installation are shown in Table 4-7. For details of each parameter, refer to the configuration definition information in "subline (subline Information)."

Table 4-7 List of Initial Values That Can Be Set Using Subline Information (WAN Line) and Initial Values During Initial Installation

Information	Information Name	Initial Value
Group Name
Subline	Selection of E1 physical layer multi-frame	CRC-4 Multiframe (crc4)
information	format in E3
(WAN line)
	Setting value of E1 national multi-bit in E3	0 (hexadecimal)
		(27: SI, 26: Unused, 25: Unused, 24: SA-4,
		23: SA-5, 22: SA-6, 21: SA-7, 20: SA-8)
	Selection of E1 timeslot multi-line rate in	64 kbps (64)
	E3
	Selection of T1 physical layer multi-frame	ESF (Extended Superframe) (esf)
	format in T3
	Selection of T1 timeslot multi-line rate in	64 kbps (64)
	T3

GR2K-GA-0014	4-41
Ver. 07-02