Hitachi GR2000 Series manual Filtering/QoS Information 51 General IGMPv6 Type Code Number

Filtering/QoS Information

Table 1-51 General IGMPv6 Type Code Number

Type	Name	Code
134	Router Advertusement (NDP)	0
135	Neighbor Solicitation (NDP)	0
136	Neighbor Advertusement (NDP)	0
137	Redirect (NDP)	0

[userDescription:priority<No.>]Specifies user priority. This parameter specify "in"(Inbound) VLAN line information.

Default: None

Range of value: 0 -7

detectingOrdinaryWhen packetthecondition}]maximumflowdetectingband restrictioncondition}(-max[premiumrate) or the{importantminimumpacketband flow

assurance (-min_rate) is executed, the important packet is transferred with priority given in the band, and the ordinary packet is transferred when the important packet is not transferred by using all the bands. This function is called the important packet assuring function. The flow detecting conditions for the ordinary packet are inputted before the premium, and the flow detecting

conditions for the important packet after the . The flow detecting conditions for the important packet can be set only after either one of the maximum band restriction (-max_rate) or the minimum band assurance (-min_rate) has been set.

The parameters that have not been set in the important packet flow detecting conditions are subjected to the same conditions as the parameters that have been set in the ordinary packet flow detecting conditions. For setting the

important packet flow	conditions, set only the flow detecting condition
parameters whose	conditions differ from the ordinary	flow
conditions.

When the important packet protecting function is used, the number of entries used per list becomes two or four entries.(Note 3)

Default: None. (The important packet protecting function is not used.)

Range of value: None

Operation Parameters

[-action]If the operation parameter is either set or changed, please be sure to set this parameter at the head of the whole operation parameter.

Default: None (No default is possible when designating the operation.)

Range of value: None

upcSpecifies<kbps>the[-upccontractbustband<Byte>]]by kbit/s. Specifies burst size in byte unit. If a value greater than the line speed is set, no action at breach is taken.

When setting this parameter, it is not possible to set -max_rate, -max_burst, and min_rate_rate, -min_rate_burst. (-upc_burst is effective only in RP-C and RP-D.)

Default:	None. (No contract band surveillance is executed.)
GR2K-GA-0014	1-93
Ver. 07-02