Hitachi GR2000 Series manual Than the local host address

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Table 5-5 Routing Protocol Error Messages (continued)

export: route-filter not found at <Value>	The specified ID is not defined. Specify the defined ID
	<Value>: specified ID
export: Set-attribute "<Name>" cannot be	Filter information inherent to IPv4 is defined in IPv6. Do not specify
specified	the filter information inherent to IPv4.
	<Name>: Specified identifier
export: Set-attribute not found at <Value>	The specified ID number is not defined, or cannot be found. Specify
	the defined ID number
	<Value>: Specified ID number
export: syntax error	Syntax error
export: tag option of route-filter must not be	The tag option of a router filter is defined for an export filter or BGP/
define for { bgp bgp4+ rip ripng }	BGP4+/RIP/RIPng protocol. Do not specify a tag option.
export: type option of route-filter must not be	The type option for the route filter is defined against the BGP/BGP4+/
define for { bgp bgp4+ rip ripng }	RIP/RIPng protocol. Do not specify the type option.
hosts: address should not be v4-compat	An IPv4-compatible address is specified in an address. Specify
	addresses other than the IPv4-compatible address.
hosts: address should not be v4-mapped	An IPv4 mapped address is specified in an address. Specify
	addresses other than the IPv4 mapped address.
hosts: last 64bit of IPv6 host address should	The lower-order 64 bits of the host address are all specified with
not be all-zero	zero. Specify the address so that all of the lower-order 64 bits are not
	zero.
hosts: linklocal address should be followed by	An interface name is not specified in the specified link local address.
% (IPv6 interface name)	Specify an interface name with the percent (%) interposed when
	specifying a link local address.
import: address not IPv6	Addresses other than an IPv6 prefix are specified. Specify the IPv6
	prefix.
import: address should not be::	Default address is specified in the address. Specify addresses other
	than the local host address.
import: address should not be v4-compat	An IPv4-compatible address is specified in an address. Specify
	addresses other than the IPv4-compatible address.
import: address should not be v4-mapped	An IPv4 mapped address is specified in an address. Specify
	addresses other than the IPv4 mapped address.
import: Attribute-filter " <Name>" cannot be	Filter information inherent to IPv4 is defined in IPv6. Do not specify
specified	the filter information inherent to IPv4.
	<Name>: Specified identifier
import: Attribute-filter not found at <Value>	The specified ID number cannot be found. Specify the defined ID
	number
	<Value>: Specified ID number
import: attribute-list name "<Name>" longer	The specified ID exceeds 15 characters. Specify ID by 15 or less
than 15 characters	characters.
	<Name>: Specified ID
import: {bgpbgp4+} attribute option of	The BGP/BGP4+ attribute option for the route filter is defined against
route-filter must not be define for	the RIP/RIPng/OSPFASE/OSPF6ASE protocol. Do not specify the
{ripripngospf_aseospf6_ase}	BGP/BGP4+ attribute option.
import: duplicate AS path pattern in list	In the import definition, an AS path pattern is duplicated. Use a
	unique AS path pattern.
import: duplicate autonomous-system in list at	In the import definition, an AS number is duplicated. Use a unique AS
<As>	number.
	<As>: Specified AS number
import: duplicate entry at <Address> mask	In the import definition, a network range is duplicated. Specify a
<Mask> [exact refine]	unique network range.
	import <Address>: Specified Address
	<Mask>: Specified Mask

5-34	GR2K-GA-0014
	Ver. 07-02