Operation Management Information

 

<mask>Description:

Specifies the net mask address

 

 

Default:

No mask

 

 

Range of Value:

Net mask address in dot notation

 

 

-ignoreDescription:-noquery-nomodifyTheseparameters,-noserve-nopeerifspecified,-notrustexecute-limitedactions-belowntpport.

 

 

 

 

Ignores all accesses from the specified host.

 

 

 

 

Ignores all the NTP Mode 6 and Mode 7 packets sent from the

 

 

 

o

specified source. Time service with that source continues.

 

 

 

 

Allows only referential access from the specified host, using

 

 

 

srve

the NTP Mode 6 and Mode 7 packets.

 

 

 

 

Ignores packets from the specified host other than those of

 

 

 

 

Mode 6 and Mode 7. As a result,

time service is given to

 

 

 

 

that host.

 

 

 

 

per

Treats the specified host not as a peer.

 

 

 

Treats the specified host not as a server for time data

 

 

no

trust

 

 

 

synchronization.

 

 

 

 

 

 

 

 

 

 

Accepts only the first-issued time data request from a client

 

 

 

 

belonging to the specified net. Any other time data request

 

 

 

 

issued later from the other clients of the specified net is

 

 

 

 

rejected in accordance with the clientlimit parameter

 

-

 

 

setting.

 

 

 

ntpport

Accepts only the packets issued from the NTP port.

 

 

When none of the above parameters are specified, -ignore

 

Default:

 

 

 

querydify

-ntpport is assumed by default.

 

 

-clientlimitDescription:<limit>Specifies the maximum number of clients that can access the

 

 

 

 

same NTP server at a time per network.

 

Default:

3

 

 

Range of Value:

(<key>): 1–4294967295 in decimal

 

 

-masterDescription:[-stratum<int>]Specifies the local time server definition and the stratum

 

 

limited

setting. This definition applies when no remote time

 

 

 

 

server exists in the network to which the router

 

 

 

 

ordinarily connects.

 

 

Default:

On with the stratum setting of 8.

 

 

Range of Value:

(<int>): 1–255 in decimal.

 

Ver. 07-02

Description:

Specifies the delay time in seconds with which a broadcast or

broadcastdelay<seconds>

 

 

 

 

 

multicast packet arrives.

 

 

Default:

0.004 when no value is specified

 

 

Range of Value:

Less than 1 in fixed-point decimal

 

GR2K-GA-0014

 

 

 

4-23

Page 353
Image 353
Hitachi GR2000 Series manual Ignores all accesses from the specified host, NTP Mode 6 and Mode 7 packets, That host