Hitachi GR2000 Series manual To delete an Snmp Manager, Request, and Set Request are permitted

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

To delete an SNMP Manager:

To displaydeleteregisteredsnmp<CommunitySNMP Managers:Name><SNMPManagerIPAddress>

Parametersshowsnmp

<
CommunityDescription:Name>	Specifies the	community name.
Default:	Undefined (but cannot be omitted).
Range of value:	Same as	. See Table 2-1, in
	router-name<RouterNam
	GR2000 Configuration Commands, (universal CLI) Vol. 1.
{<SNMPDescription:managerIPAddress>Specifiesthe<SNMPmanagerIPv6address.
Default:	Undefined (but cannot be omitted)
Range of value:	Specify IP address (dot notation) in <SNMP manager IP
	address> or specify IPv6 address (colon notation) in <SNMP
	manager IPv6 address>.

-readDescription:-read_write}Sets the MIB operation mode for the specified SNMP Manager.

	When -read is specified, Get Request and GetNext Request are
	permitted. When read_write is specified, Get Request, GetNext
	Request, and Set Request are permitted.
Default:	read
Range of value:	read or read-write
{-noneDescription:-trap-exSetstrapthetrapselectiontransmissiontrap}modeAddress>}for the specified SNMP
	Manager. When none is specified, no trap is performed. When
	is specified, the standard trap is enabled. When ex_trap is
	specified, both the standard trap and the private trap are
	enabled. The individually specified trap is issued when
	selection_trap is specified.
Default:	none
Range of value:	Select none, trap, ex-	or selection_trap
Description:	Sets the transmission level of the system messages for the
-level<Level>	private trap. This parameter is valid only when the trap
	transmission mode is ex_trap or system_msg_trap. Table 3-2
	displays the list of system messages to transmitted by the
	private trap depending on the level specified by this parameter.
Default:	9
Range of value:	1 to 9 (decimal) is specified in <Level>.
3-2		GR2K-GA-0014
		Ver. 07-02