Hitachi GR2000 Series manual Default Uses port number Range of Value 0, Used, Times

Default:

Range of Value:

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

"(double quotation mark), { (beginning of brace), } (end of brace), ’ (single quotation mark), ; (semicolon), $ (dollar), and ’ (reverse single quotation mark).

For more information, see Table 1-95

authDescription:port<PortNo.Specifies> the RADIUS server port number.

Default: Uses port number 1812.

-Range of Value: 0 - 65535

primaryDescription:	Used the specified RADIUS server with priority.
	The RADIUS server specifying the "primary" option is used first
	for authentication. If the "primary" option is used for multiple
	RADIUS servers, the RADIUS server specified as "primary" and
	highest in the display of configuration definition information is
	used.
Default:	Priority is not set.
Range of Value:	None

-retransmitDescription:<Counts.Specifies>the number of authentication demands resent to RADIUS servers.

2 (times).

0 - 15

-timeoutDescription:<Seconds>Specifies the timeout time for a response from RADIUS servers.

Default: 5 (sec).

Range of Value: 1 - 30

Example

1.Specifying RADIUS servers:

Setting IP address 192.168.10.1, RADIUS key "Aodiug-cl3*%63j9d" and the RADIUS server.

4-28	};radius(config)#};192.168yeskeyshowradius.{"Aodiug10.1{radius192yes-cl3*%63j9d".168.10.1-key;"Aodiug-cl3*%63j9d"	Ver. 07-02
		GR2K-GA-0014