Hitachi GR2000 Series manual Operation Management Information Parameters, GFR2

Operation Management Information

Parameters

The initial value items that can be set using ATM Information and the initial values during initial installation are shown in Table 4-11.

Table 4-11 List of Initial Values That Can Be Set Using ARM Information and Initial Values During Initial Installation

Information	Information Name	Initial Value
Group Name
ATM	Setting range of VPI and VCI values	3 (VPI=0-63,
information		CVCI=32-511)
	Setting of maximum VP count	64
	Setting of service category pattern	cbr_cbr_ubr_ubr
Traffic	Setting of cell transmission priority in CBR	2
information
	Setting of cell transmission priority in ABR	2
	Setting of mcr value in ABR	38kbps
	Setting of icr value in ABR	38kbps
	Setting of cell transmission priority in UBR	4
	Setting of MBS value in VBR	30
	Discard threshold of non-priority packet (CLP1) in GFR	1000cells
	Discard threshold of priority packet (CLP0) in GFR	1500cells
	Setting of cell transmission priority in GFR	3
	pcr value of highest priority packet in GFR2	250kbps
	Priority frame discard threshold of highest priority queue in GFR2	700cells
	Non-priority frame discard threshold of highest priority queue in	500cells
	GFR2
	Priority frame discard threshold of high priority queue in GFR2	700cells
	Non-priority frame discard threshold of high priority queue in	500cells
	GFR2
	Priority frame discard threshold of middle priority queue in GFR2	700cells
	Non-priority frame discard threshold of middle priority queue in	500cells
	GFR2
	Priority frame discard threshold of low priority queue in GFR2	700cells
	Non-priority frame discard threshold of low priority queue in	500cells
	GFR2
	Setting of cell transmission priority in GFR2	3
VP information	VP warning and loop-back function	A VP warning and
		loop-back function
		are used.

GR2K-GA-0014	4-47
Ver. 07-02