Hitachi GR2000 Series manual Router Control Information Error Messages

	Configuration Error Messages
Table 5-1 Configuration Error Messages (continued)
<Option> out of range	The option entered exceeds the maximum value. Recheck the
	option.
<Option> too long	The number of sentences in the option exceeds the maximum value.
	Recheck the option.
The total of <item> exceeded <value>.	The total of <item> exceeded <value>. Set the value in the range.
	<item>Parameter name, <value 1-1>Maximum value
This router is operated using the configuration	This router operates with configuration information produced in the
data created in "CLI(CLItype1)" mode.	CLI type 1 mode.
This router is operated using the configuration	This router operates with configuration information produced in the
data created in "Universal CLI(CLItype2)"	CLI type 2 mode.
mode.

5.2Router Control Information

Table 5-2 Router Control Information Error Messages

Message	Contents
Can not disable HTTP access because a user	Since the user has performed log-in by using a browser, log-in using
is logged in from a browser.	the HTTP protocol cannot be prohibited. To prohibit log-in using the
	HTTP protocol, perform log-out from this device.
Invalid local IP address.	Local IP address value invalid. Enter a correct local IP address.
Invalid remote access IP address.	Remote access IP address value invalid. Enter a correct P address
	of remote access terminal.
Relations between local address and	Relations between relations between local address and IP address
destination ip address in ip configuration are	or destination IP address in IP configuration are inconsistent.
inconsistent.	Set local address different from IP address or destination IP address
	in IP (No VPN definition) configuration.
Remote access IP address not specified.	IP address of remote access terminal has not been specified.
	Specify IP address of remote access terminal.

GR2K-GA-0014	5-3
Ver. 07-02