Hitachi GR2000 Series manual Group address mask Mask Mask Mask

		Configuration Error Messages
Table 5-6 Multicast Router Control Information Error Messages (continued)
multicast: can not set interface address at	The interface addresses specified in the multicast definition cannot
<Address>	be set. Do not specify the following interfaces because they are not
	supported in the multicast.
	(1)	Interface of RM Ethernet
	(2)	Interface of AUX(RS232C)
	(3)	Interface in which the IP interface type is broadcast type in other
	than LAN/WAN (PPP).
	(4)	Shared address interface.
	(5)	Local loop-back interface
	(6)	Null interface.
	(7)	Router device address (device address set by using the config
	router command).
	(8)	Tunnel interface.
	<Address>: Specified interface address.
multicast: duplicate group address with the	Interface addresses are defined in duplication in the same multicast
same mask at <Group address>	group address in the multicast definition. Perform specification by
	using any one of the following forms so that the combination of the
	multicast group address and mask will not be duplicated.
	(1)<Group address>
	(2)<Group address>/<Masklen> (<Masklen>: Mask length)
	(3)<Group address> masklen <Masklen> (<Masklen>: Mask length)
	(4)	<group address> mask <Mask> (<Mask>: Mask)
	Perform specification so that the definition will not be duplicated also
	in the group addresses specified in the join and the staticjoin.
	<Group address>: Specified multicast group address.
multicast: duplicate group address with the	Interface addresses are defined in duplication in the same multicast
same mask at <Group address> / <Masklen>	group address in the multicast definition. Perform specification by
	using any one of the following forms so that the combination of the
	multicast group address and mask will not be duplicated.
	(1)	<Group address>
	(2)	<Group address>/<Masklen>(<Masklen>: Mask length)
	(3)	<Group address> masklen <Masklen>(<Masklen>: Mask length)
	(4)	<group address> mask <Mask>(<Mask>: Mask ) Perform
	specification so that the definition will not be duplicated also in the
	group addresses specified in the join and the staticjoin.
	<Group address>: Specified multicast group address.
	<Masklen>: Specified mask length.
multicast: duplicate group address with the	Interface addresses are defined in duplication in the same multicast
same mask at <Group address> masklen	group address in the multicast definition. Perform specification by
<Masklen>	using any one of the following forms so that the combination of the
	multicast group address and mask will not be duplicated.
	(1)	<Group address>
	(2)	<Group address>/<Masklen>(<Masklen>: Mask length)
	(3)	<Group address> masklen <Masklen>(<Masklen>: Mask length)
	(4)	<group address> mask <Mask>(<Mask>: Mask)
	Perform specification so that the definition will not be duplicated also
	in the group addresses specified in the join and the staticjoin.
	<Group address>: Specified multicast group address.
	<Masklen>: Specified mask length.

GR2K-GA-0014	5-55
Ver. 07-02