Hitachi GR2000 Series Settings, Default See table below Range of value, GR2K-GA-0014 197 Ver

Filtering/QoS Information

The output priority and queuing priority are determined by a TOS value when parameters replace_tos and tos_map of QoS IP frame condition information or parameter replace_tos of filter list information are set.

The setting of this command is not required when the DSCP value of Diff-serv is associated with the output priority and queuing priority using the recommended value of this router. The recommended mapping list of the DSCP value and the output priority and queuing priority is shown in Table 1-99 Mapping Example of DSCP Value and Each Class.

Input Format

Settings

Changing<No[set]qos.>][settings-discard-tos-mapclass<No-precedence.>]<No.>[-priority_class

Deleting settings

Displayingshowdeletesettingsqos-tos-map-		<No.>
Parametersqos-tos-map
ecedenceDescription:<No.>This parameter sets TOS precedence.
Default:	See table below
-priorityRange of value:	0-7

Description:class<No.This>parameter sets the output priority class. In the case of output priority control, used as the output priority class. In the case of minimum bandwidth and round-robin, used as the queue number.

Default:	See table below
Range of value:	1-8

-discardDescription:class<No.>This parameter sets the queuing priority class.

Default: See table below.

Range of value: 1-4

GR2K-GA-0014	1-197
Ver. 07-02