Hitachi GR2000 Series manual Configuration Error Messages

	Configuration Error Messages
Table 5-5 Routing Protocol Error Messages (continued)
import: Non-masked bits not zero for	At masklen, 1 is set to non-masked bit of the specified address.
<Address> masklen <Masklen>	Set non-masked bit 0.
	<Address>: Specified address
	<Masklen>: Specified mask length
import: not IPv6 prefix	Addresses other than an IPv6 prefix are specified. Specify the IPv6
	prefix.
import: out of range	The parameter-specified range is exceeded in the input command
	syntax. Numeric values of more than 4294967296 are contained.
	Reconfirm a parameter.
import: proto option of route-filter must not be	The proto option for the route filter is defined in the import filter.
define for import filter	Do not specify the proto option.
import: route-filter name "<Name>" cannot be	The specified route filter contains invalid protocol information or
specified	network information. Specify the valid route filter name.
import: route-filter name "<Name>" longer	The specified ID exceeds 15 characters. Specify ID by 15 or less
than 15 characters	characters.
	<Name>: Specified ID
import: route-filter not found at <Value>	The specified ID is not defined
	Specify a defined ID.
	<Value>: Specified ID
import: Set-attribute "<Name>" cannot be	Filter information inherent to IPv4 is defined in IPv6. Do not specify
specified	the filter information inherent to IPv4.
	<Name>: Specified identifier
import: Set-attribute not found at <Value>	The specified ID number cannot be found.
	Specify the defined ID number
	<Value>: Specified ID number
import: syntax error	Syntax error
import: tag option of route-filter must not be	The tag option for the route filter is defined in the import filter or the
define for {import filter bgp bgp4+ rip	BGP/BGP4+/RIP/RIPng protocol. Do not specify the tag option.
ripng}
import: tag option of route-filter must not be	The tag option for the route filter is defined in the import filter or the
define for {import filter bgp bgp4+ rip	BGP/BGP4+/RIP/RIPng. Do not specify the tag option.
ripng}
ip: invalid vpn number value at <Value> not in	VPN number is out of valid range. Specify value within the range of 1
range 1 to <Max_Value>	to <Max_Value>.
	<Value>: Specified VPN number
	<Max_Value>Maximum VPN number
network-filter: duplicate entry at <Address>	In the network-filter definition, an network range is duplicated.
mask <Mask> [exact refine]	Specify a unique network range
	<Address>: Specified Address
	<Mask>: Specified mask
network-filter: duplicate entry at <Prefix>/	The network range is defined in duplication in the network-filter
<Prefixlen> [exact refine]	definition. Specify the range so that the network range will not be
	duplicated.
	<Prefix>: Specified prefix
	<Prefixlen> Specified prefix length
network-filter: duplicate network-filter at	The specified ID has been already registered. Specify the other ID.
<Value>
	<Value>: Specified ID
network-filter: each network must belong to	A network information of different address family is mixed in the
the same family: <Name>	network-filter. Specify the information so does not overlap with
	deferent address in one network-filter name.
	<Value>: Network filter name
network-filter: invalid high end of range value	In the between specification, upper limit value of mask range is
at <Value> not in range 0 to {32128}	invalid. Specify a value within the range of 0 to 32/128.
	<Value>: Upper limit of specified mask range
GR2K-GA-0014	5-37
Ver. 07-02