5
The CSC55 center channel
and the CSB5 are designed
to be mounted on the wall.
There are two (2) fixed-
mount wall brackets pro-
vided for the CSC55, and one
for the CSB5. Each speaker
bracket will require up to
three 1-1/2" #10
wood
screws; each screw should
be fastened to a wall stud.
If a wall stud is unavailable,
install an anchor appropriate
for a 1-1/2"
#10 screw.
NOTE: The customer is
responsible for the correct
selection and use of mount-
ing hardware (available
through hardware stores)
to ensure the proper and
safe wall-mounting of the
speakers.
Step 1. Using the included
mounting template (CSC55
only) or the bracket back
plate (CSB5 only), mark the
positions on the wall where
you would like to place the
mounting screws.
Step 2. Attach the back
plate(s) of the bracket to
the wall using three screws
(not included).
Step 3. Attach the front
plate(s) (with the two holes)
of the bracket(s) to the
CSC55 or CSB5, using the
provided screws.
Step 4. Slide the CSC55 or
CSB5 speaker with attached
bracket front plate(s) onto
the back plate(s) of the
bracket(s).
Once positioned properly,
the speaker should slide
down slightly and become
secure.
To remove the speaker from
the wall, simply slide the
speaker up.
WALL-MOUNTING THE CSC55 AND CSB5
CSC55
CSB5
NOTE: Remove the base of the
CSB5 by removing the two
screws on the bottom of the
speaker.
CS OM 5/16/06 9:24 AM Page 5