Q-Logic FC HBA CLI manual XML Format 2 for adapter settings information is as follows

A

B – XML Format 2 XML2 Tags for Each Option

scli -c 0 -x2

The XML Format 2 for adapter settings information is as follows:

<?xml version="value" encoding="value"?> <QLogic>

<AppName>SANsurfer FC HBA CLI</AppName> <AppVersion>vn.n.nn Build nn</AppVersion <AppXmlVersion>n.nn</AppXmlVersion>

<HBA>

<HBA Instance="value" HBAModel="value" HBAPort="value" WWNN="value" WWPN="value" />

<Param

ConnectionOption="value"

DataRate="value"

FrameSize="value"

HardLoopId="value"

LoopResetDelay="value"

EnableHostAdapterBIOS="value"

EnableHardLoopId="value"

FibreChannelTapeSupport="value"

OperationMode="value"

IntDelayTimer="value"

ExecutionThrottle="value"

LoginRetryCount="value"

EnableLipReset="value"

PortDownRetryCount="value"

EnableLipFulllogin="value"

LinkDownTimeout="value"

EnableTargetReset="value" LUNsPerTarget="value" />

</HBA>

<Status> n </Status> <Reboot> n /Reboot>

</QLogic>

The <HBA> …</HBA> sequence repeats for each HBA

Each parameter is listed on a separate line for clarity; however, multiple parameters can be on the same line.

For multiple adapters, repeat the above sequence with the ID number (ID Number="value") of the next adapter.

B.7.2

SFF DMI

(Command Line Option -dm)

The XML Format 2 for SFF DMI (general information) is as follows:

SN0054614-00 F B-3